Robot Pi Shop

MP1584EN DC-DC 3A Adjustable Step Down Buck Converter Module

$0.99
Quantity

Mini MP1584EN DC-DC 3A Adjustable Step down Buck Converter Module is a mini DC-DC Step Down Module having input 4.5-28V to output 0.8-20V @ 3A capacity. MP1584EN Mini DC-DC 3A power step-down adjustable module. Buck Converter is usually use to convert 24V to 12V 9V 5V 3V as per application requirement.

It features soft start, thermal shutdown, and under-voltage lockout (UVLO) to protect the module from operating at the insufficient supply voltage. Set voltage using a voltmeter and adjust to proper output voltage before installing in your device.

Features:

  • High-Efficiency Pulse Skipping Mode for Light Load
  • Ceramic Capacitor Stable
  • Internal Soft-Start
  • Internally Set Current Limit without a Current Sensing Resistor

Specifications:

  • IC Chip:MP1584EN.
  • Input Voltage:4.5V-28V.
  • Output Voltage:0.8V-20V.
  • Output Current: 3A Max
  • Output Ripple:Less than 30mV
  • Conversion efficiency: 92% (highest)
  • Switch frequency:1.5 MHz (highest),typical 1 MHz
  • Dimension:22mm * 17mm * 4mm.
  • Operating Temperature: -45°C ~ + 85°C

You can adjust the voltage by placing a multimeter synchronously at the output, and adjust the potentiometer with a screwdriver. It can achieve precise voltages with tiny adjustments.
Do not short-circuit the output.
When setting parameters, ensure that the output voltage is stable before using the module.

NOTE:
Pay attention to the positive and negative poles;
If used at large current for a long time,heat dissipation is recommended;
Do not use light load(less than 10% of the output power) or no-load;
If the output voltage is always equal to the input voltage,turn the potentiometer clockwise for more than 10 turns.