Robot Pi Shop

KY-005 Infrared Transmitter Module

$1.25
Quantity
Pickup available at Robot Pi Shop

The KY-005 Infrared Transmitter module emits infrared light at 38kHz. It can be used to control TVs, stereos, air conditioners and other devices with IR receivers. It can also be used together with the KY-022 Infrared Receiver module.

Compatible with Arduino, Raspberry Pi, ESP32 and other popular microcontrollers.

KY-005 SPECIFICATIONS

This module is quite simple and consists of a 5mm infrared LED and 3 male header pins. Handle with caution, do not flash IR light directly to the eyes.

Operating Voltage 5V
Forward Current 30 ~ 60 mA
Power Consumption 90mW
Operating Temperature -25°C to 80°C [-13°F to 176°F]
Board Dimensions 18.5mm x 15mm [0.728in x 0.591in]

CONNECTION DIAGRAM

Connect the board power line (middle) and ground (-) to +5 and GND on the Arduino respectively.

Connect the signal pin (S) to pin 3 on the Arduino Uno.

The pin number for the IR transmitter is determined by IRremote library. Other platforms might use a different pin.

KY-005 Arduino Uno
S Pin 3
middle +5V
– GND
KY-005 Infrared Transmitter Module

Default Title

  • Robot Pi Shop

    Pickup available,usually ready in 1 hour

    Ground Floor Shop, Sayde Street, Fanar Matn 1202
    Fanar
    Lebanon

    +96171791287

You may also like