Banana Pi M1+ plus BPI-M1+ Dual Core A20 1GB RAM on-board WiFi Open-source singel-board computer SBC

​This is forum for Banana Pi, you can upload your questions to get answer:
http://forum.banana-pi.org/

Package Includes:
1pcs * Banana Pi M1+
Hardware Specification of Banana Pi M1+

Soc: Allwinner A20
CPU: ARM Cortex-A7 Dual-Core 1 GHz (ARM v7 instruction set)
GPU: Mali400MP2 Complies with OpenGL ES 2.0/1.1 (hardware acceleration support)
SDRAM: 1GB DDR3(shared with GPU)
Power: 5V/2A via MicroUSB (DC in Only) and /or Micro USB (OTG)
PMU: AXP209

Features:

• Low-level perpherials: 40 Pins Header ,28xGPIO,some of which can be used for specific functions including UART,I2C,SPI,PWM,CAN,I2S,SPDIF,LRADC,ADC,LINE-IN,FM-IN,HP-IN
  
• On board Network: 10/100/1000Mbps ethemet(Realtek RTL8211E/D)
  
• Wifi Module: Wifi 802.11 b/g/n
  
• Bluetooth: Optional
  
• On board Storage: Micro SD(TF) Card,SATA 2.0
  
• Display: Supports multi-channel HD display:
  
• HDMI 1.4 (Type A -full)
  
• LVDS/RGB/CPU display interface (DSI) for raw LCD panels
  
• Composite Video(PAL and NTSC)(via 3.5mm TRRS jack shared with audio out)
  
• 11 HDMI resolutions from 640x480 to 1920x1080 plus various PAL and NTSC standards
  
• Video: HD H.264 2160p video decording
  
• Multi-format FHD video decording,including Mpeg 1/2 ,Mpeg4,H.263,H.264,ect H.264
• high profile 1080p@30fps or 720p@60fps encording
  
• Audio outputs: HDMI ,analog audio(via 3.5mm TRRS jack shared with composite video
• out),I2S audio (also potentially for audio input)
  
• Camera: Parellel 8-bit camere interface
  
• Audio input: On board microphone
  
• USB: 2USB 2.0 host,1 USB 2.0 OTG (all direct from A20 chip)
  
• Buttons: Reset button
  
• Power button
  
• U-boot button
  
• Leds: Power status led(red)
  
• User defined led1(green)
  
• User defined led2(blue)
  
• Other: IR receiver