Robot Pi Shop

Banana Pi M1+

$46.99
Quantity

Banana Pi M1+ plus BPI-M1+ Dual Core A20 1GB RAM on-board WiFi Open-source singel-board computer SBC

​This is forum for Banana Pi, you can upload your questions to get answer:
http://forum.banana-pi.org/

Package Includes:
1pcs * Banana Pi M1+
Hardware Specification of Banana Pi M1+

Soc: Allwinner A20
CPU: ARM Cortex-A7 Dual-Core 1 GHz (ARM v7 instruction set)
GPU: Mali400MP2 Complies with OpenGL ES 2.0/1.1 (hardware acceleration support)
SDRAM: 1GB DDR3(shared with GPU)
Power: 5V/2A via MicroUSB (DC in Only) and /or Micro USB (OTG)
PMU: AXP209

Features:

  • Low-level perpherials: 40 Pins Header ,28xGPIO,some of which can be used for specific functions including UART,I2C,SPI,PWM,CAN,I2S,SPDIF,LRADC,ADC,LINE-IN,FM-IN,HP-IN
  • On board Network: 10/100/1000Mbps ethemet(Realtek RTL8211E/D)
  • Wifi Module: Wifi 802.11 b/g/n
  • Bluetooth: Optional
  • On board Storage: Micro SD(TF) Card,SATA 2.0
  • Display: Supports multi-channel HD display:
  • HDMI 1.4 (Type A -full)
  • LVDS/RGB/CPU display interface (DSI) for raw LCD panels
  • Composite Video(PAL and NTSC)(via 3.5mm TRRS jack shared with audio out)
  • 11 HDMI resolutions from 640x480 to 1920x1080 plus various PAL and NTSC standards
  • Video: HD H.264 2160p video decording
  • Multi-format FHD video decording,including Mpeg 1/2 ,Mpeg4,H.263,H.264,ect H.264
  • high profile 1080p@30fps or 720p@60fps encording
  • Audio outputs: HDMI ,analog audio(via 3.5mm TRRS jack shared with composite video
  • out),I2S audio (also potentially for audio input)
  • Camera: Parellel 8-bit camere interface
  • Audio input: On board microphone
  • USB: 2USB 2.0 host,1 USB 2.0 OTG (all direct from A20 chip)
  • Buttons: Reset button
  • Power button
  • U-boot button
  • Leds: Power status led(red)
  • User defined led1(green)
  • User defined led2(blue)
  • Other: IR receiver