ADS1256 24-Bit 8-Channel High-Precision ADC Data Acquisition Module
The ADS1256 High-Precision ADC Data Acquisition Module is a high-resolution analog-to-digital conversion board designed for precision measurement and data-acquisition applications.
Based on the Texas Instruments ADS1256 24-bit Delta-Sigma ADC, the module supports up to 8 single-ended analog inputs or 4 differential inputs, data rates up to 30kSPS, an integrated programmable gain amplifier (PGA), and SPI communication.
It is suitable for precision sensors, load cells, bridge sensors, laboratory instrumentation, industrial measurement, data logging, and microcontroller-based acquisition systems where significantly higher resolution is required than the built-in ADC of a typical development board.
Technical Specifications
-
ADC IC: ADS1256
-
ADC Architecture: Delta-Sigma (ΔΣ)
-
Resolution: 24-Bit
-
Noise-Free Resolution: Up to 23 Bits under suitable operating conditions
-
Analog Input Channels: 8 Single-Ended or 4 Differential
-
Maximum Data Output Rate: 30kSPS
-
Communication Interface: SPI
-
Programmable Gain Amplifier (PGA): Integrated
-
PGA Gain Settings: 1×, 2×, 4×, 8×, 16×, 32× and 64×
-
Maximum Nonlinearity: ±0.0010%
-
Input Buffer: Selectable Chopper-Stabilized Buffer
-
Calibration: Self & System Calibration
-
Digital Filtering: Programmable
-
50/60Hz Rejection: Supported
-
Reference: Precision reference source provided on common module versions
-
Typical Module Supply: 5V DC
-
Interface Signals: SCLK, DIN, DOUT, CS, DRDY and control signals
-
Operating Temperature of ADS1256 IC: -40°C to +85°C
24-Bit High-Resolution Conversion
The ADS1256 provides 24-bit analog-to-digital conversion, making it suitable for applications where small changes in analog signals need to be detected.
The converter uses a 4th-order Delta-Sigma modulator and programmable digital filter to provide high-resolution, low-noise measurement.
Although the ADC has a nominal resolution of 24 bits, the actual usable or noise-free resolution depends on factors including sampling rate, PGA setting, reference quality, PCB layout, sensor noise, grounding, power-supply noise, and environmental interference.
8 Single-Ended / 4 Differential Inputs
The flexible input multiplexer can be configured for:
8 × Single-Ended Analog Inputs
or
4 × Differential Analog Inputs
Differential measurement is particularly useful for low-level sensors and bridge-based measurement systems where the voltage difference between two signals needs to be measured accurately.
The inputs are multiplexed into one ADC converter, so the maximum 30kSPS data rate should not be interpreted as 30kSPS simultaneously available on every channel.
Programmable Gain Amplifier
The ADS1256 includes a low-noise Programmable Gain Amplifier (PGA) with selectable gain settings:
1× / 2× / 4× / 8× / 16× / 32× / 64×
Higher gain settings can be useful when measuring small sensor signals because the input signal can use more of the ADC's available conversion range.
The selected gain must remain compatible with the allowed analog-input range.
SPI Communication
The module communicates with a host microcontroller using an SPI-compatible serial interface.
Typical connections include:
SCLK – Serial Clock
DIN – Data Input
DOUT – Data Output
CS – Chip Select
DRDY – Data Ready
PDWN / SYNC – Synchronization / Power Control
This allows the ADS1256 to be integrated with suitable Arduino, ESP32, STM32, Raspberry Pi, and other embedded platforms, provided the correct logic levels, power requirements, and software drivers are used.
Precision Measurement Applications
The high resolution and programmable gain make the ADS1256 particularly useful for measuring low-level analog signals from devices such as:
Load Cells & Strain Gauges
Pressure Sensors
Bridge Sensors
Precision Voltage Sensors
Temperature Measurement Circuits
Industrial Transducers
Laboratory Instruments
Suitable signal conditioning may still be required depending on the sensor.
Applications
Ideal for high-precision data acquisition, electronic scales, load-cell systems, scientific instrumentation, laboratory measurement, industrial process control, sensor data logging, bridge measurement, precision voltage measurement, test equipment, automation systems, Arduino projects, ESP32 projects, STM32 systems, and Raspberry Pi data-acquisition projects.
Important Note
The ADS1256 itself supports 24-bit conversion and up to 30kSPS, but these two specifications should not be interpreted as 24-bit noise-free performance at the maximum sampling rate.
TI specifies up to 23 bits noise-free resolution under suitable conditions, while effective resolution decreases as the data rate increases.
The analog-input range also depends on the reference voltage, PGA setting, supply configuration, and module design. Some commonly sold ADS1256 modules specify an analog measurement range of approximately 0–3V despite operating from a 5V supply.
Always check the exact board configuration before applying higher analog voltages to the input terminals.
Package Includes
1 × ADS1256 24-Bit 8-Channel High-Precision ADC Data Acquisition Module