Robot Pi Shop

Breakout Adapter for NRF24L01

$1.50

Shipping calculated at checkout.

Quantity

NRF24L01+ Breakout Adapter Board with 3.3V Voltage Regulator

The NRF24L01+ Breakout Adapter Board provides a convenient and more stable way to connect an NRF24L01 / NRF24L01+ 2.4GHz wireless transceiver module to Arduino and other microcontroller platforms.

It features an onboard 3.3V voltage regulator, allowing the NRF24L01 module to be powered from a typical 5V supply without requiring a separate external 3.3V regulator.

The adapter also includes power filtering components that help provide a more stable supply to the radio module, reducing communication problems caused by power-supply noise or voltage fluctuations.

Technical Specifications

  • Product Type: NRF24L01 Breakout / Power Adapter
  • Compatible Modules: NRF24L01 / NRF24L01+
  • Radio Socket: 8-Pin NRF24L01 Socket
  • Onboard Regulator: 3.3V Linear Voltage Regulator
  • Regulated Output: 3.3V DC
  • Recommended Input: 5V DC
  • Specified Regulator Input Range: Approx. 4.8–12V DC
  • Maximum Regulator Input: 15V
  • Recommended Maximum Input: Below 12V
  • Communication Interface: SPI
  • Power Indicator: Onboard SMD LED
  • Power Filtering: Onboard Bypass / Decoupling Components
  • Typical Dimensions: Approx. 26 × 19 × 12mm
  • Connection: Direct NRF24L01 2×4 Socket + Header Pins

Built-In 3.3V Regulation

NRF24L01 wireless modules require a stable 3.3V power supply.

This adapter includes an onboard voltage regulator that allows a typical 5V supply from an Arduino or external power source to be used while providing regulated 3.3V power to the NRF24L01 module.

This makes the radio module easier to integrate into 5V-powered development systems.

Improved Power Stability

NRF24L01 modules can be sensitive to power-supply noise and voltage drops, particularly during wireless transmission.

The adapter includes onboard power filtering components to help stabilize the supply delivered to the radio.

This can reduce problems such as:

  • Intermittent Communication
  • Failed Packet Transmission
  • Random Disconnections
  • Unstable Radio Operation
  • Module Resets

For particularly demanding installations, additional decoupling near the radio may still improve stability.

Easy NRF24L01 Installation

The adapter provides a dedicated 8-pin socket matching the standard NRF24L01 / NRF24L01+ module layout.

Simply insert the wireless module into the adapter and connect the adapter to your microcontroller.

This simplifies wiring and reduces the risk of incorrect power connections.

SPI Communication

The adapter does not convert the NRF24L01 communication protocol.

The NRF24L01 continues to communicate with the host microcontroller using its standard SPI interface.

Typical NRF24L01 signals include:

  • VCC
  • GND
  • CE
  • CSN / CS
  • SCK
  • MOSI
  • MISO
  • IRQ

The exact microcontroller pins used for CE and CSN depend on your software and project configuration.

Compatible Platforms

The adapter can be used with many popular development platforms, including:

  • Arduino Uno
  • Arduino Mega
  • Arduino Nano
  • ESP32
  • ESP8266
  • STM32
  • Raspberry Pi Pico
  • Raspberry Pi
  • AVR / PIC Microcontrollers
  • 8051-Based Systems
  • Other SPI-Equipped Controllers

Important 3.3V Logic Note

The onboard regulator provides the correct 3.3V power supply for the NRF24L01, but the adapter should not automatically be assumed to provide logic-level conversion for all SPI signal lines.

The NRF24L01 itself is a 3.3V device.

When integrating it with a 5V microcontroller, always verify the logic-level requirements of the radio module and your controller.

Applications

Ideal for Arduino wireless projects, NRF24L01 communication systems, robotics, remote controls, wireless sensor networks, IoT projects, telemetry systems, home automation, remote data acquisition, RC projects, and embedded wireless communication.

Important Note

This product is an adapter/power board, not the NRF24L01 wireless transceiver itself.

The NRF24L01 module must be installed separately unless specifically stated as included.

For normal Arduino applications, a 5V input supply is recommended rather than operating close to the regulator's maximum input-voltage rating.

For reliable wireless operation, use a stable power source and keep wiring between the adapter and microcontroller reasonably short.

Package Includes

1 × NRF24L01+ Breakout Adapter Board with 3.3V Regulator

NRF24L01 Wireless Module Not Included