E18-D80NK Adjustable Infrared Proximity Sensor – 3–80cm, NPN NO
The E18-D80NK Adjustable Infrared Proximity Sensor is a compact photoelectric sensor designed for non-contact object detection, obstacle sensing and automatic counting applications.
It combines an infrared transmitter and receiver in a single cylindrical housing and provides an adjustable detection distance of approximately 3–80cm.
The sensor features an NPN normally-open (NO) digital output, making it suitable for robotics, Arduino projects, automation systems, production-line counting and object detection.
Technical Specifications
Adjustable 3–80cm Detection Range
The sensor provides an adjustable detection range of approximately:
3cm to 80cm
A built-in adjustment control allows the detection sensitivity/distance to be changed according to the application.
The actual detection distance depends on several factors, including:
- Object Color
- Object Size
- Surface Reflectivity
- Object Angle
- Ambient Lighting
- Sensor Alignment
Bright or highly reflective objects generally provide stronger infrared reflections than dark or absorbent surfaces.
Infrared Reflective Detection
The E18-D80NK contains both an infrared emitter and receiver.
The emitter sends infrared light toward the target. When an object enters the detection area, some of this infrared energy is reflected back toward the receiver.
The internal electronics detect this reflection and switch the sensor's output.
Because it uses reflected infrared light, no separate reflector or receiver unit is normally required.
NPN Normally-Open Output
The E18-D80NK uses an:
NPN Normally-Open (NO) Output
The output transistor switches toward ground when the sensor detects a target.
This type of output is commonly used with:
- Microcontrollers
- PLC Inputs
- Counters
- Relays
- Automation Controllers
A suitable pull-up may be required depending on the controller and circuit being used.
Typical Wire Connections
Common E18-D80NK versions use three wires:
-
Brown: +5V
-
Blue: GND
-
Black: NPN Signal Output
Wire colors should always be verified on the actual supplied sensor before connection.
Arduino Compatibility
The E18-D80NK can be used as a digital object-detection input for Arduino.
Typical connection:
Brown → 5V
Blue → GND
Black → Arduino Digital Input
Because the sensor provides a switching output rather than a measured analog distance, the Arduino normally reads only whether an object is:
Detected / Not Detected
The sensor does not provide the actual distance in centimeters.
ESP32 Compatibility
The sensor can also be interfaced with an ESP32, but care should be taken with the signal voltage.
Because the E18-D80NK uses an NPN open-collector style output, the signal can be pulled up to a suitable 3.3V logic level for an ESP32 input.
Do not apply a 5V logic signal directly to an ESP32 GPIO.
Fast Response
With a response time of less than approximately:
2ms
the sensor is suitable for applications such as object counting and detecting moving items on small production or conveyor systems.
Ambient Light Resistance
The E18-D80NK is designed to reduce interference from normal visible ambient light.
However, very strong sunlight, direct infrared sources or highly reflective environments can still affect detection performance.
For best results, test and calibrate the sensor under the actual lighting conditions where it will be installed.
Applications
Ideal for:
- Robot Obstacle Detection
- Maze Robots
- Arduino Robots
- ESP32 Projects
- Production-Line Object Counting
- Conveyor Systems
- Automatic Counters
- Object Presence Detection
- Position Detection
- Automatic Doors
- DIY Automation
- Industrial Prototypes
- Educational Robotics
- Smart Machines
- Non-Contact Switching
Important Detection Note
The E18-D80NK is a proximity/object detection sensor, not a distance-measuring sensor.
The adjustment control determines the approximate detection threshold.
It does not output a numerical distance measurement like an ultrasonic, Time-of-Flight or LiDAR sensor.
If an application requires the actual distance to an object, a dedicated distance sensor should be used instead.
Object Detection Limitations
Detection performance varies according to the target.
Dark, matte, very small, transparent or highly angled objects may be more difficult to detect because they reflect less infrared light back toward the receiver.
Transparent materials may sometimes be detected, but reliable detection should not be assumed without testing the specific material.
Important Notes
-
Detection range is adjustable from approximately 3–80cm.
-
The sensor provides a digital detection output, not an analog distance value.
-
Output type is NPN normally open.
- Detection distance depends on target color, size, surface and reflectivity.
- Strong sunlight or external infrared sources can affect operation.
- Calibrate the adjustment control after installing the sensor in its final position.
- Verify the wire colors before applying power.
- Do not exceed the specified output current.
- For inductive or high-current loads, use an appropriate relay or driver stage rather than driving the load directly from the sensor.
Package Includes
1 × E18-D80NK Adjustable Infrared Proximity Sensor