Robot Pi Shop

KY-017 Mercury Tilt Switch Module

$1.25

Shipping calculated at checkout.

Quantity

KY-017 Mercury Tilt Switch Module – Digital Tilt & Orientation Sensor for Arduino & ESP32

The KY-017 Mercury Tilt Switch Module is a compact sensor designed to detect changes in tilt, inclination, and orientation using a mercury-based mechanical switch.

The module contains a small sealed glass capsule with a conductive mercury droplet. When the sensor is tilted, the mercury moves inside the capsule, opening or closing the electrical contacts and changing the digital output.

The KY-017 is suitable for Arduino, ESP32, Raspberry Pi, robotics, orientation detection, and educational electronics projects.

Key Features

  • Model: KY-017
  • Sensor Type: Mercury Tilt Switch
  • Detection Method: Mechanical Tilt and Orientation
  • Output Type: Digital (HIGH/LOW)
  • Operating Voltage: Typically 3.3V–5V DC
  • Switch Technology: Sealed Mercury Contact
  • 3-Pin Interface: Signal (S), VCC (+), GND (-)
  • Simple ON/OFF Tilt Detection
  • Compact PCB Design
  • Compatible with Arduino and Microcontroller Projects

Technical Specifications

Parameter Specification
Model KY-017
Product Type Mercury Tilt Switch Sensor Module
Sensor Technology Mercury Contact Switch
Detection Type Tilt / Orientation
Operating Voltage Typically 3.3V–5V DC
Output Type Digital
Output States HIGH / LOW
Number of Pins 3
Pin Configuration S / + / -
Switch Contact Type Mechanical ON/OFF
Measurement Type Binary Tilt Detection
Board Dimensions Approximately 18.5 × 15mm
Interface Digital GPIO

Pin Configuration

Pin Function
S Digital Signal Output
+ Power Supply
- Ground

Arduino Connection Example

KY-017 Arduino Uno
S D3
+ 5V
- GND

The Arduino monitors the module's digital output to detect a change in the tilt switch position.

Arduino Example Code

const int tiltPin = 3;

void setup() {
  pinMode(tiltPin, INPUT);
  Serial.begin(9600);
}

void loop() {
  int tiltState = digitalRead(tiltPin);

  if (tiltState == HIGH) {
    Serial.println("Switch HIGH");
  } else {
    Serial.println("Switch LOW");
  }

  delay(100);
}

The HIGH and LOW states depend on the sensor's orientation and the module's internal circuit.

Applications

  • Tilt and Orientation Detection
  • Arduino and ESP32 Projects
  • Raspberry Pi GPIO Input
  • Robotics and Automation
  • Equipment Position Monitoring
  • Inclination-Activated Alarms
  • Educational Electronics
  • DIY Motion-Activated Switching
  • Simple Position Detection Systems

Important Notes

  • The KY-017 provides binary tilt detection and does not measure the exact tilt angle.
  • It is not an accelerometer or gyroscope.
  • The sensor contains mercury, a hazardous substance, inside a sealed glass capsule.
  • Do not break, open, crush, or heat the glass capsule.
  • If the capsule breaks, avoid contact with the mercury, isolate the area, and follow appropriate hazardous-material cleanup procedures. Do not use a household vacuum cleaner.
  • Dispose of damaged or unwanted modules through an approved hazardous or electronic waste collection service.
  • Software debouncing may be necessary to prevent false triggers during movement.
  • The switch activation angle depends on the capsule's physical orientation.
  • For ESP32 and Raspberry Pi, use 3.3V-compatible signal levels.
  • Verify the pin configuration and operating voltage of the supplied module before wiring.

Package Includes

1 × KY-017 Mercury Tilt Switch Module