Robot Pi Shop

KY-009 SMD RGB Module

$1.33
Quantity
Pickup available at Robot Pi Shop

The KY-009 RGB Full Color LED module emits a range of colors by mixing red, green, and blue light. Each color is adjusted by using PWM.

Compatible with popular electronics platforms like Arduino, Raspberry Pi and ESP32.

This module consists of a 5050 SMD LED and 4 male header pins. Use with limiting resistors to prevent LED burnout.

Operating Voltage 5V max
Red 1.8V ~2.4V
Green 2.8V ~ 3.6V
Blue 2.8V ~ 3.6V
Forward Current 20mA ~ 30mA
Operating Temperature -25°C to 85°C [-13°F ~ 185°F]
Board Diemsions 18.5mm x 15mm [0.728in x 0.591in]

CONNECTION DIAGRAM

Connect the red pin (R) to Pin 9, the green pin (G) to pin 10, the blue pin (B) to pin 11 and finally the ground pin (-) to GND.

You must use resistors between the board and the Arduino to prevent LED burnout.

KY-009 Breadboard Arduino
R 180Ω resistor Pin 9
G 110Ω resistor Pin 10
B 110Ω resistor Pin 11
–   GND
KY-009 SMD RGB Module

Default Title

  • Robot Pi Shop

    Pickup available,usually ready in 1 hour

    Ground Floor Shop, Sayde Street, Fanar Matn 1202
    Fanar
    Lebanon

    +96171791287

You may also like