SN7473 Dual JK Flip-Flop IC with Reset – DIP-14
The SN7473 is a digital logic integrated circuit containing two independent JK flip-flops with asynchronous reset (clear) inputs. Part of the 7400-series TTL logic family, it is designed for sequential logic circuits, binary counters, frequency division, and digital control applications.
Each flip-flop stores one bit of binary information and operates using J and K inputs, a clock signal, and an active-LOW reset input. The outputs change according to the JK logic state on the falling edge of the clock.
The SN7473 is suitable for digital electronics experiments, educational projects, and circuit prototyping.
Key Features
-
Dual JK Flip-Flops: Two independent flip-flops in one IC.
-
Negative-Edge Triggered: Output updates on the falling edge of the clock.
-
Asynchronous Reset: Active-LOW clear input for each flip-flop.
-
Complementary Outputs: Provides Q and Q̅ outputs.
-
TTL Logic: Compatible with standard 5V TTL logic systems.
-
Binary Storage: Each flip-flop stores one bit of information.
-
Toggle Operation: Can operate as a frequency divider when J and K are HIGH.
-
DIP-14 Package: Suitable for breadboards and through-hole PCB assembly.
Technical Specifications
| Parameter |
Specification |
| Part Number |
SN7473 |
| IC Type |
Dual JK Flip-Flop |
| Logic Family |
7400 Series TTL |
| Number of Flip-Flops |
2 |
| Flip-Flop Type |
JK |
| Clock Trigger |
Falling Edge |
| Reset Type |
Asynchronous, Active LOW |
| Outputs |
Q and Q̅ |
| Nominal Supply Voltage |
5V DC |
| Operating Voltage |
4.75–5.25V DC |
| Package |
DIP-14 |
| Number of Pins |
14 |
| Mounting Type |
Through-Hole |
| Operating Temperature |
0°C to +70°C (standard SN7473) |
Pin Configuration
| Pin |
Function |
Description |
| 1 |
1CLK |
Flip-Flop 1 Clock |
| 2 |
1CLR |
Flip-Flop 1 Clear (Active LOW) |
| 3 |
1K |
Flip-Flop 1 K Input |
| 4 |
VCC |
+5V Power Supply |
| 5 |
2CLK |
Flip-Flop 2 Clock |
| 6 |
2CLR |
Flip-Flop 2 Clear (Active LOW) |
| 7 |
2J |
Flip-Flop 2 J Input |
| 8 |
2Q̅ |
Flip-Flop 2 Inverted Output |
| 9 |
2Q |
Flip-Flop 2 Output |
| 10 |
2K |
Flip-Flop 2 K Input |
| 11 |
GND |
Ground |
| 12 |
1Q |
Flip-Flop 1 Output |
| 13 |
1Q̅ |
Flip-Flop 1 Inverted Output |
| 14 |
1J |
Flip-Flop 1 J Input |
JK Flip-Flop Truth Table
| Reset |
J |
K |
Clock |
Output Q |
| 0 |
X |
X |
X |
0 (Reset) |
| 1 |
0 |
0 |
Falling Edge |
No Change |
| 1 |
0 |
1 |
Falling Edge |
0 (Reset) |
| 1 |
1 |
0 |
Falling Edge |
1 (Set) |
| 1 |
1 |
1 |
Falling Edge |
Toggle |
Notes:
- X = Don't Care.
- Reset operates independently of the clock.
- Q̅ is the complement of Q.
- With J = K = 1, the output toggles on each falling clock edge.
Connection Example
To use the first flip-flop as a frequency divider:
- Connect Pin 4 (VCC) to +5V DC.
- Connect Pin 11 (GND) to ground.
- Connect Pin 14 (J) and Pin 3 (K) to logic HIGH.
- Connect Pin 2 (CLR) to logic HIGH for normal operation.
- Apply a clock signal to Pin 1 (CLK).
- Read the divided-frequency output from Pin 12 (Q).
With J and K HIGH, the flip-flop toggles on every falling clock edge, producing an output frequency equal to half the input clock frequency.
Applications
- Binary Counters
- Frequency Divider Circuits
- Sequential Logic Systems
- Digital State Storage
- Clock Signal Division
- Digital Control Circuits
- Educational Electronics
- Breadboard Prototyping
Important Notes
-
Power Supply: Use a regulated 5V DC supply.
-
Reset: The asynchronous clear input is active LOW.
-
Clock: The flip-flops respond to the falling edge of the clock.
-
Unused Inputs: Connect unused logic inputs to defined logic levels.
-
Decoupling: Use a 100nF capacitor between VCC and GND near the IC.
-
Compatibility: Verify voltage levels before connecting to 3.3V microcontrollers such as ESP32 or Raspberry Pi.
-
Pinout: Confirm the exact manufacturer datasheet before wiring, especially if using an SN74LS73 or another variant.
Package Includes