4-Channel DC-DC Step-Down Buck Converter – 3.3V, 5V, 12V & Adjustable Output
The 4-Channel DC-DC Step-Down Buck Converter Module provides multiple regulated voltage outputs from a single DC power source, making it convenient for electronics, robotics, automation, and embedded-system projects that require several different supply voltages.
The board provides dedicated 3.3V, 5V, and 12V fixed outputs, plus one adjustable 2-28V output channel. Each channel is rated for up to 3A as specified, with an overall maximum module load of 50W.
Based on the XL2596 / LM2596-compatible step-down regulator architecture, the module operates at approximately 150kHz and includes protection functions such as input reverse-polarity protection, thermal shutdown, and current limiting.
Technical Specifications
-
Converter Type: DC-DC Step-Down / Buck Converter
-
Number of Output Channels: 4
-
Fixed Outputs: 3.3V / 5V / 12V
-
Adjustable Output: 2-28V
-
Maximum Current per Channel: Up to 3A as specified
-
Maximum Total Load Power: 50W as specified
-
Controller IC: XL2596, LM2596-compatible as specified
-
Switching Frequency: Approx. 150kHz
-
Input Reverse-Polarity Protection: Yes
-
Thermal Shutdown: Built-In
-
Current Limiting: Built-In
-
Operating Temperature: -40°C to +85°C
-
Storage Temperature: -65°C to +150°C
-
Board Dimensions: Approx. 88 × 55mm
Output Channels
3.3V Fixed Output
- Input Voltage: 4.5-30V DC
- Output Voltage: 3.3V DC
- Output Accuracy: ±3% as specified
5V Fixed Output
- Input Voltage: 6.5-30V DC
- Output Voltage: 5V DC
- Output Accuracy: ±3% as specified
12V Fixed Output
- Input Voltage: 13.5-30V DC
- Output Voltage: 12V DC
- Output Accuracy: ±3% as specified
Adjustable Output
- Input Voltage: 4.5-30V DC
- Adjustable Output Range: 2-28V DC as specified
- Maximum Current: Up to 3A as specified
Important Step-Down Limitation
This module is a buck converter and cannot boost voltage.
The input voltage must therefore be sufficiently higher than the required output voltage. For example, the 12V fixed channel requires at least approximately 13.5V input according to the supplied specifications.
Similarly, although the adjustable channel is specified as 2-28V, a 28V output requires a sufficiently high input voltage and cannot be produced from a lower-voltage source such as 12V.
Applications
Suitable for powering Arduino UNO and Mega boards, STM32 systems, ARM controllers, FPGA/CPLD projects, sensors, wireless modules, CCTV/IP cameras, PTZ systems, WiFi routers, network equipment, smart-home systems, LEDs, DC loads, battery-powered equipment, and robotics projects.
It can also provide suitable supply rails for compatible wireless modules such as nRF24L01, CC1101, CC2500, CC2530, and Zigbee modules.
Important Power & Current Note
The stated 3A rating is the maximum specified current per channel and should not automatically be considered a continuous current rating under all operating conditions.
Actual continuous output capability depends on input voltage, output voltage, total power, ambient temperature, airflow, PCB cooling, and conversion losses.
The combined output load should remain within the specified 50W maximum total power, and additional cooling may be required for sustained high-current operation.
Because conversion is not 100% efficient, the input power supply must be capable of supplying more power than the total power required by the connected loads.
Installation Note
Before connecting a load to the adjustable channel, set and verify its output voltage using a multimeter. Incorrect output voltage can damage connected electronics.
Do not exceed the 30V maximum specified input voltage, and always observe correct input and output polarity.
Package Includes
1 × 4-Channel DC-DC Step-Down Buck Converter Module