Robot Pi Shop

5V 1A UPS Power Supply Module

$2.45

Shipping calculated at checkout.

Quantity

5V 1A UPS Power Supply Module for 3.7V 18650 Lithium Battery – 5W

The 5V 1A UPS Power Supply Module is a compact battery-backed power converter designed to provide a regulated 5V output using a 3.7V lithium-ion or lithium-polymer battery.

Designed for DIY electronics, embedded systems, and portable applications, this module can be used to build a small uninterruptible power supply (UPS) that helps maintain power to connected devices during interruptions to the main power source.

Its compact PCB design makes it suitable for integration into custom electronic projects where space is limited.

Key Features

  • 5V Regulated Output: Provides a 5V DC output rated up to 1A.
  • 5W Output Power: Suitable for compatible low-power electronic devices.
  • Lithium Battery Support: Designed for 3.7V lithium-ion and lithium-polymer batteries.
  • 18650 Battery Compatible: Can be used with suitable single-cell 18650 battery configurations.
  • Battery Backup Application: Suitable for creating compact UPS power systems.
  • Input Reverse Polarity Protection: Helps protect against incorrect input polarity.
  • Input Surge Protection: Protection against input voltage surges.
  • Output Reverse Connection Protection: Additional output-side protection.
  • Output Short-Circuit Protection: Helps protect the module against output faults.
  • Compact Design: Suitable for embedded and portable electronics.

Technical Specifications

Parameter Specification
Product Type UPS Voltage Converter Module
Input Voltage 5V DC
Rated Input Current 1A
Output Voltage 5V DC
Maximum Output Current 1A
Rated Output Power 5W
Supported Battery 3.7V Lithium-Ion / Lithium-Polymer
Battery Capacity Up to 10Ah (manufacturer-stated)
Input Reverse Polarity Protection Yes
Input Surge Protection Yes
Output Reverse Connection Protection Yes
Output Short-Circuit Protection Yes
Operating Temperature -40°C to +85°C (stated specification)
Operating Humidity 0–95% RH
PCB Dimensions 33 × 17 × 4 mm

Connection Overview

The module is intended for use with a 5V input power source, a compatible 3.7V lithium battery, and a 5V output load.

Connection Function
5V Input External DC power supply
Battery Positive (+) Lithium battery positive terminal
Battery Negative (-) Lithium battery negative terminal
5V Output (+) Positive supply to connected device
Output Ground (-) Ground connection to connected device

Important: Verify the actual PCB terminal labels before wiring. Do not connect the battery directly to the 5V input or output terminals.

Applications

  • DIY Uninterruptible Power Supply (UPS) Projects
  • Arduino and ESP32 Power Backup Applications
  • Portable Electronic Devices
  • Battery-Powered Sensor Systems
  • Small IoT Devices
  • Embedded Electronics
  • Low-Power Monitoring Equipment
  • Custom 5V Battery Backup Circuits

Important Notes

  • Battery is not included.
  • Designed for compatible 3.7V nominal lithium batteries, not 7.4V or 11.1V battery packs.
  • Maximum rated output is 5V at 1A (5W).
  • Use a suitable lithium battery with appropriate protection.
  • Confirm the module's battery charging and protection functions before using an unprotected cell.
  • Actual battery backup duration depends on battery capacity, efficiency, and connected load.
  • UPS switchover behavior and interruption time are not specified and should be tested for applications requiring continuous operation.
  • Not recommended for high-power devices exceeding the module's rated output.

Package Includes

  • 1 × 5V 1A UPS Power Supply Module PCB

18650 lithium battery, battery holder, cables, and external power supply are not included.