R421A08 8-Channel RS485 Modbus RTU Relay Module – 12V
The R421A08 is an 8-channel programmable relay control module designed for remote switching, automation, and digital control applications. It uses the standard Modbus RTU communication protocol and supports both RS485 and TTL UART interfaces, making it suitable for integration with PLCs, industrial controllers, computers, Arduino, ESP32, Raspberry Pi, and other compatible control systems.
The module provides 8 relay outputs and 8 digital input detection channels, allowing it to monitor external digital signals while independently controlling multiple electrical devices. Configurable device addressing and parameter memory make it particularly useful for multi-module automation and distributed control systems.
Technical Specifications
-
Model: R421A08
-
Module Type: Modbus Relay Controller
-
Operating Voltage: 12V DC
-
Relay Output Channels: 8
-
Digital Input Channels: 8
-
Communication Protocol: Modbus RTU
-
Communication Interface: RS485 / TTL UART
-
Baud Rate: 9600bps
-
Device Address Range: 0x01–0x3F
-
Relay Output: Independent Relay Switching
-
Address Configuration: Supported
-
Parameter Memory: Supported
-
Input Reverse-Polarity Protection: Supported
-
Output Status Indication: Supported
-
Operating Temperature: -20°C to +85°C
-
Operating Humidity: 5%–95% RH
RS485 Modbus RTU Control
The R421A08 uses the widely adopted Modbus RTU protocol over RS485, making it suitable for industrial and long-distance communication applications.
Multiple compatible Modbus devices can be connected on the same RS485 network and assigned different addresses, allowing a single master controller to communicate with multiple relay modules.
The configurable address range is:
0x01 to 0x3F
8 Relay Outputs & 8 Digital Inputs
The module provides eight independently controllable relay outputs, allowing multiple loads or circuits to be switched from a Modbus master device.
It also supports 8-channel digital input detection, allowing external switches, sensors, contacts, or other compatible digital signals to be monitored by the control system.
This combination of inputs and outputs makes the R421A08 useful for both monitoring and control applications.
RS485 & TTL UART Interfaces
In addition to RS485 communication, the module supports a TTL UART interface, providing additional flexibility when integrating it with compatible microcontrollers and embedded systems.
When connecting to Arduino, ESP32, Raspberry Pi, or similar controllers, ensure that the correct communication interface and compatible signal voltage levels are used.
Applications
Ideal for industrial automation, PLC systems, remote relay control, smart-home automation, lighting control, pumps, fans, solenoid valves, access-control systems, alarm systems, equipment monitoring, agricultural automation, robotics, test equipment, and Modbus-based control projects.
The module is especially useful when several relay outputs and digital inputs need to be controlled or monitored remotely through an RS485 network.
Important Note
The original specification lists a configurable delay function, but the supplied delay-time range is incomplete. The exact programmable delay range should therefore be confirmed from the R421A08 documentation before publishing a specific timing value.
Relay contact voltage and current ratings should also be verified from the markings on the installed relays before connecting a load.
When controlling AC mains voltage, use appropriate electrical protection, fusing, wiring, enclosure, and safety clearances. Installation of mains-voltage circuits should be performed by a qualified person.
Package Includes
1 × R421A08 8-Channel RS485 Modbus RTU Relay Module