A3144 Unipolar Hall Effect Magnetic Sensor Switch – 4.5-24V
The A3144 is a unipolar digital Hall effect sensor designed for reliable, contactless detection of magnetic fields. When the appropriate magnetic pole approaches the sensing area, the device switches its digital output without requiring any physical contact.
The sensor integrates a Hall element, voltage regulator, temperature compensation, amplifier, Schmitt trigger, and open-collector output stage in a compact 3-pin package. It is ideal for magnetic position detection, RPM measurement, speed sensing, proximity switches, door sensors, limit detection, and robotics projects.
Technical Specifications
-
Model: A3144
-
Sensor Type: Unipolar Hall Effect Switch
-
Detection Type: Magnetic / Contactless
-
Output: Digital Open-Collector
-
Output Operation: Switching
-
Operating Voltage: 4.5–24V DC
-
Maximum Continuous Output Sink Current: 25mA
-
Supply Current: Up to approximately 9mA under specified conditions
-
Output Saturation Voltage: Up to approximately 400mV at 20mA under specified conditions
-
Integrated Schmitt Trigger: Yes
-
Temperature Compensation: Integrated
-
Reverse Battery Protection: Integrated
-
Package: 3-Pin Hall Sensor Package as supplied
-
Pin 1: VCC / Supply
-
Pin 2: GND
-
Pin 3: Output
How It Works
The A3144 detects the presence of a suitable magnetic field and changes its digital output state when the magnetic operating threshold is reached.
Because it is a unipolar Hall switch, it responds to the appropriate magnetic polarity rather than behaving as a linear sensor that measures magnetic-field strength.
The built-in Schmitt trigger provides clean switching between ON and OFF states, making the sensor suitable for detecting rotating magnets, mechanical positions, and other magnetic targets.
Open-Collector Output
The A3144 uses an open-collector output, so a pull-up resistor is required for normal digital operation.
This output configuration makes the sensor easy to interface with many digital logic circuits and microcontrollers when the correct pull-up voltage is used.
For microcontroller projects, the output can be connected to a digital input with a suitable external pull-up resistor or, where appropriate, the microcontroller's internal pull-up.
Applications
Ideal for Arduino and microcontroller projects, magnetic proximity detection, wheel RPM measurement, tachometers, motor speed sensing, door and window detection, position sensing, limit switches, robotics, security systems, counters, automation equipment, and contactless switching applications.
Unlike a mechanical switch, the A3144 has no physical contacts to wear out or mechanically bounce, making it useful for repeated switching applications.
Important Note
The A3144 is a digital magnetic switch, not a linear Hall effect sensor. It is intended to detect whether a suitable magnetic field is present rather than provide an analog measurement proportional to magnetic-field strength.
The sensor itself requires at least approximately 4.5V supply voltage, so it should not be powered directly from 3.3V when following the original A3144 specification. Its open-collector output can, however, be pulled up to a logic voltage suitable for the connected controller when properly configured.
When viewing the branded face of the standard 3-pin package, the original A3144 documentation identifies the pins as 1: Supply, 2: Ground, 3: Output. Always verify the markings and pinout of the exact device supplied before connection.
Package Includes
1 × A3144 Hall Effect Magnetic Sensor Switch