Robot Pi Shop

Antenna 868MHz 5dBi

$5.99

Shipping calculated at checkout.

Quantity

868MHz 5dBi Omnidirectional LoRa Antenna

The 868MHz 5dBi Antenna is designed for wireless communication systems operating in the 868MHz ISM frequency band, including LoRa, LoRaWAN, IoT, telemetry, remote monitoring, and wireless sensor applications.

With a specified gain of 5dBi, the antenna is designed to provide improved RF coverage compared with many lower-gain compact antennas, making it suitable for embedded wireless devices, gateways, sensor nodes, and long-range communication projects.

Technical Specifications

  • Product Type: RF Antenna
  • Operating Frequency: 868MHz
  • Antenna Gain: 5dBi
  • Nominal Impedance: 50Ω
  • Radiation Pattern: Omnidirectional
  • Polarization: Vertical / Linear
  • Frequency Band: 868MHz ISM Band
  • Typical Applications: LoRa, LoRaWAN, IoT, LPWAN & RF Communication
  • Connector: Verify Actual Product Version
  • Color: Typically Black

868MHz Wireless Communication

The antenna is optimized for wireless systems operating around 868MHz, a frequency commonly used by LoRa, LoRaWAN, IoT, telemetry, smart metering, and other sub-GHz communication systems.

Compared with higher-frequency wireless systems such as 2.4GHz Wi-Fi, sub-GHz communication can offer useful propagation characteristics for long-range, low-data-rate applications.

5dBi Antenna Gain

The specified 5dBi gain helps concentrate the antenna's radiation pattern to improve horizontal coverage compared with a lower-gain omnidirectional antenna under suitable installation conditions.

A higher antenna gain does not increase the transmitter's actual RF output power. Instead, it changes how RF energy is distributed spatially.

Actual communication range depends on many factors, including:

Transmitter Power
Receiver Sensitivity
Antenna Position & Orientation
Cable and Connector Losses
Buildings & Obstacles
RF Interference
Installation Height
Matching / VSWR
Local RF Regulations

Omnidirectional Coverage

The antenna uses an omnidirectional radiation pattern, making it suitable for applications where wireless devices may be located in multiple directions around the transmitter or receiver.

For best performance, the antenna should normally be installed vertically and positioned away from large metallic objects or other structures that may interfere with its radiation pattern.

LoRa & IoT Applications

The 868MHz operating frequency makes the antenna suitable for compatible:

LoRa Modules
LoRaWAN Gateways
IoT Sensor Nodes
Wireless Telemetry Systems
Smart Agriculture Systems
Remote Monitoring Equipment
Industrial Wireless Systems
Smart Metering
Home Automation
Wireless Alarm Systems

It can also be used with other compatible RF equipment designed specifically for the 868MHz band.

Important Note

This antenna is designed for 868MHz equipment. It should not automatically be considered suitable for 433MHz, 915MHz, 2.4GHz, Wi-Fi, Bluetooth, or cellular systems unless the antenna manufacturer specifically specifies those additional frequency bands.

The antenna connector must also match the RF device. SMA and RP-SMA connectors may look similar but are electrically/mechanically different at the center contact, so verify the connector type before ordering or installation.

The stated 5dBi value is antenna gain, not transmitter power and not a guaranteed communication distance.

Always observe the applicable local regulations regarding operating frequency, transmitter power, antenna gain, and effective radiated power.

Applications

Ideal for LoRa and LoRaWAN projects, IoT systems, wireless sensor networks, smart agriculture, telemetry, remote monitoring, industrial automation, smart metering, home automation, embedded RF projects, gateways, and other 868MHz wireless communication systems.

Package Includes

1 × 868MHz 5dBi Antenna