Robot Pi Shop

Pressure Sensor Module

$3.99

Shipping calculated at checkout.

Quantity

MEMS Air Pressure Sensor Module – 0–40 kPa

The MEMS Air Pressure Sensor Module is a compact electronic sensor designed to measure low-range air pressure in pneumatic systems, monitoring equipment, and electronic projects.

Featuring MEMS (Micro-Electro-Mechanical Systems) pressure sensing technology, this module provides an analog output signal that varies according to the applied pressure.

With a specified 0–40 kPa measurement range, the sensor is suitable for applications involving low-pressure air measurement, pneumatic monitoring, and pressure-based control systems.

Its compact PCB design and clearly labeled connection pins make it convenient for integration into compatible microcontroller and embedded electronic projects.

Key Features

  • MEMS Pressure Sensing Technology: Compact pressure measurement solution.
  • 0–40 kPa Measurement Range: Suitable for low-pressure air measurement applications.
  • Analog Output: Provides a pressure-dependent electrical signal for external measurement circuitry.
  • Compact PCB Design: Easy to integrate into electronic projects.
  • Wide Operating Temperature Range: Sensor specification lists operation from -40°C to +125°C.
  • Low-Pressure Monitoring: Suitable for pneumatic systems and air pressure measurement.
  • Microcontroller Integration: Can be connected to compatible analog measurement circuits with appropriate signal conditioning.
  • Convenient Connections: PCB includes labeled power and signal terminals.

Technical Specifications

Parameter Specification
Product Type Air Pressure Sensor Module
Sensor Technology MEMS
Measurement Medium Air
Pressure Measurement Range 0–40 kPa
Equivalent Pressure Range 0–400 mbar
Output Type Analog
Operating Temperature -40°C to +125°C (sensor specification)
Storage Temperature -40°C to +150°C
Zero-Pressure Offset -15 mV to +15 mV (as listed)
Output Impedance 4–6 kΩ (as listed)
Hysteresis -0.7% FS (as listed; requires verification)
Sensor Supply 10V DC listed; exact requirement requires verification
Current Consumption 2.0 mA listed; requires verification
Mounting Type PCB Module
Connection Interface Pin Header / Solder Pads

Pin Configuration

The PCB photograph shows the following terminal labels:

Pin Function
VCC Power Supply Input
OUT Analog Pressure Signal Output
SCK Clock / Control Signal (function to be verified)
GND Ground

Note: The exact sensor IC and communication requirements must be confirmed before connecting the module. The SCK pin suggests that additional signal processing or control circuitry may be present.

Applications

  • Pneumatic Pressure Monitoring
  • Air Pressure Measurement Systems
  • Low-Pressure Control Equipment
  • Industrial Monitoring Projects
  • Air Pump Monitoring
  • Educational Electronics Projects
  • Embedded Sensor Systems
  • Pressure-Based Automation

Important Notes

  • Measurement Medium: Intended for air pressure measurement. Compatibility with liquids and other gases is not confirmed.
  • Pressure Range: Do not exceed the specified measurement range without confirming the sensor's maximum allowable pressure.
  • Power Supply: Verify the module's actual operating voltage before connecting it to a microcontroller.
  • Analog Compatibility: The output may require amplification, filtering, or signal conditioning.
  • Arduino and ESP32: Compatibility depends on the module's voltage and output characteristics. Direct connection is not guaranteed.
  • Medical Applications: Not approved or verified for medical diagnosis or patient monitoring.
  • Calibration: Accurate pressure measurement may require calibration and conversion of the output signal.

Package Includes

  • 1 × MEMS Air Pressure Sensor Module