The KY-020 Tilt Switch Sensor module is a switch that reacts to movement. It closes the circuit when it���s tilted to the side as long as it is moved with enough force and degree of inclination to activate the ball switch inside.
Compatible with Arduino, Raspberry Pi, ESP32 and other microcontrollers. For more sensitive tilt detection use the�ï"https://arduinomodules.info/ky-017-mercury-switch-module/">KY-017 mercury tilt switch.
KY-020 SPECIFICATIONS
This module consists of a 10k�� resistor, a metallic ball switch with bidirectional conduction that will open/close the circuit when tilted, and 3 male header pins. This module does not measure tilt angle.
Operating Voltage
3.3V ~ 5V
Output Type
Digital
��
CONNECTION DIAGRAM
Connect the module���s Power line (middle) and ground (-) to +5 and GND respectively.
