Robot Pi Shop

BC558 Transistor

$0.20

Shipping calculated at checkout.

Quantity

BC558 PNP General-Purpose Transistor – 30V, 100mA, TO-92

The BC558 is a general-purpose PNP bipolar junction transistor (BJT) designed for small-signal amplification, low-current switching, analog circuits, and complementary transistor applications.

With a 30V collector-emitter voltage rating and collector current up to 100mA, the BC558 is suitable for signal amplification, high-side switching, sensor circuits, audio electronics, driver stages, and general-purpose electronic projects.

Its compact TO-92 through-hole package makes it suitable for breadboards, educational projects, electronics repair, prototyping, and custom PCB designs.

Technical Specifications

  • Part Number: BC558
  • Transistor Type: PNP Bipolar Junction Transistor (BJT)
  • Polarity: PNP
  • Collector-Emitter Voltage (VCEO): 30V Max
  • Collector-Base Voltage (VCBO): 30V Max
  • Emitter-Base Voltage (VEBO): Approx. 5V Max
  • Continuous Collector Current (IC): 100mA Max
  • Peak Collector Current (ICM): Typically Up to 200mA
  • DC Current Gain (hFE): Depends on Gain Grade
  • Transition Frequency (fT): Typically 100MHz or Higher, Depending on Manufacturer
  • Maximum Junction Temperature: +150°C
  • Package: TO-92
  • Number of Pins: 3
  • Mounting Type: Through-Hole
  • Complementary NPN Type: BC548

General-Purpose PNP Transistor

The BC558 can be used as both a small-signal amplifier and a low-current electronic switch.

As a PNP transistor, it is particularly useful for high-side switching, complementary transistor circuits, analog amplification, and signal-control applications.

The BC558 is commonly paired with the BC548 NPN transistor in complementary circuit designs.

BC558 Gain Groups

The BC558 family may be available in different current-gain classifications, including:

BC558A: Lower Gain Group

BC558B: Medium Gain Group

BC558C: Higher Gain Group

The exact DC current gain depends on the manufacturer, gain classification, collector current, operating voltage, and temperature.

If your component is marked simply BC558 without an A, B, or C suffix, avoid guaranteeing a specific current-gain range.

Switching Applications

The BC558 can be used for low-current switching applications such as:

  • LED Control
  • Buzzers
  • Small Signal Loads
  • High-Side Switching
  • Logic Interfaces
  • Sensor Circuits
  • Driver Stages

When controlled from a microcontroller or logic circuit, an appropriate base resistor should be used.

For inductive loads such as relay coils, suitable protection such as a flyback diode should be included where required.

Signal Amplification

The BC558 is also suitable for small-signal analog amplification.

Typical applications include:

  • Audio Amplifier Stages
  • Sensor Signal Conditioning
  • Preamplifier Circuits
  • Analog Driver Circuits
  • Oscillators
  • Complementary Amplifiers
  • General Analog Electronics

BC558 vs BC556 vs BC557

The BC556, BC557, and BC558 are closely related PNP general-purpose transistors. Their main distinction is the collector-emitter voltage rating:

BC556: 65V VCEO

BC557: 45V VCEO

BC558: 30V VCEO

All three belong to the general 100mA collector-current class.

The BC558 is therefore well suited to lower-voltage circuits where the higher voltage capability of the BC556 or BC557 is not required.

BC558 vs BC548

The BC558 and BC548 form a useful complementary PNP/NPN pair:

BC558: PNP, 30V, 100mA

BC548: NPN, 30V, 100mA

They can be used together in complementary amplifier stages, switching circuits, push-pull circuits, signal processing, and general analog electronics.

Microcontroller Applications

The BC558 can be used with controllers such as:

  • Arduino
  • ATmega
  • ESP32
  • STM32
  • PIC
  • Raspberry Pi GPIO

Because the BC558 is a PNP transistor, it is commonly used for high-side switching rather than the low-side switching arrangement typically used with an NPN transistor.

The supply voltage, GPIO voltage, base resistor, required base current, and transistor biasing must all be considered when designing the circuit.

Important Note

The 100mA collector-current specification is an absolute maximum rating, not a recommended continuous operating current for every application.

Safe operating conditions depend on collector-emitter voltage, base current, ambient temperature, power dissipation, switching duty cycle, and thermal conditions.

The BC558 is intended for low-current and small-signal applications. For motors, high-power LEDs, large relays, solenoids, heaters, and other higher-current loads, use an appropriately rated transistor or MOSFET.

Electrical specifications and the Collector, Base, and Emitter pinout may vary between manufacturers, so always verify the datasheet for the exact component supplied before installation.

Applications

Ideal for small-signal amplification, high-side switching, complementary transistor circuits, audio electronics, sensor circuits, LED control, signal conditioning, oscillators, microcontroller interfaces, Arduino projects, educational electronics, electronics repair, breadboard prototyping, laboratory experiments, and DIY electronics.

Package Includes

1 × BC558 PNP General-Purpose Transistor – TO-92