Robot Pi Shop

BCH8-25 25A 2-Pole Modular Contactor

$9.99

Shipping calculated at checkout.

Quantity

BCH8-25 25A 2-Pole Modular Contactor – 1NO+1NC, DIN Rail

The BCH8-25 Modular Contactor is a compact DIN-rail mounted electromagnetic contactor designed for remotely switching electrical loads in residential, commercial, and light industrial control systems.

This version features a 2-pole 1NO + 1NC contact configuration, providing one Normally Open and one Normally Closed contact. With a rated current of up to 25A for AC-7a loads, it is suitable for applications such as lighting control, electric heating, ventilation systems, pumps, building automation, and load-management circuits.

Its modular form factor allows convenient installation alongside circuit breakers and other DIN-rail electrical equipment inside distribution panels.

Technical Specifications

  • Model: BCH8-25
  • Device Type: Modular AC Contactor
  • Number of Poles: 2
  • Contact Configuration: 1NO + 1NC
  • NO: 1 × Normally Open Contact
  • NC: 1 × Normally Closed Contact
  • Rated Current – AC-7a: 25A
  • Rated Current – AC-7b: Approx. 8.5–9A, Depending on Manufacturer Version
  • Conventional Thermal Current (Ith): 25A
  • Rated Operating Voltage (Ue): Up to 250V AC for 2-Pole Version
  • Rated Insulation Voltage (Ui): 500V
  • Control Coil: AC, Voltage Depends on Version
  • Frequency: 50/60Hz
  • Maximum Switching Frequency: Approx. 30 Operations per Hour
  • Electrical Endurance: Approx. 100,000 Operations
  • Mechanical Endurance: Approx. 1,000,000 Operations
  • Protection Rating: IP20 at Contactor Body
  • Operating Temperature: Approx. -5°C to +60°C
  • Mounting: DIN Rail
  • Installation Type: Distribution Board / Electrical Control Panel
  • Standard: IEC/EN 61095 Series

1NO + 1NC Contact Configuration

This BCH8-25 version provides two mechanically controlled contacts:

1NO – Normally Open

The NO contact remains open when the contactor coil is not energized. When the coil is energized, the contact closes and allows current to flow.

1NC – Normally Closed

The NC contact remains closed when the contactor coil is not energized. When the coil is energized, the contact opens.

Having both NO and NC contacts makes this contactor useful for switching, interlocking, status control, automation, and change-of-state applications.

DIN-Rail Modular Design

The BCH8 series uses a compact modular design suitable for installation inside electrical distribution boards and control panels.

It can be mounted alongside:

  • Circuit Breakers
  • Timers
  • Smart Relays
  • Automation Controllers
  • Protection Devices
  • DIN-Rail Power Supplies
  • Energy Management Equipment

This makes it particularly suitable for building automation and electrical-panel applications where space is limited.

Typical Loads

The BCH8-25 can be used to control compatible electrical loads such as:

  • Lighting Circuits
  • Electric Heating
  • Ventilation Systems
  • Fans
  • Pumps
  • Water Heaters
  • Building Automation Loads
  • Load-Shedding Circuits
  • Remote-Controlled Electrical Circuits

The allowable current depends on the load category. Resistive or slightly inductive AC-7a loads can have a higher allowable current than motor-type AC-7b loads.

How It Works

The BCH8-25 contains an electromagnetic coil that controls the internal contacts.

When the rated control voltage is applied to the coil, the electromagnetic mechanism changes the state of the contacts:

NO Contact → Closes

NC Contact → Opens

When the coil is de-energized, the contacts return to their normal positions.

This allows a relatively low-current control circuit, timer, relay, automation controller, or switch to control a higher-current electrical circuit.

Applications

Suitable for home automation, lighting control, electric heating, ventilation systems, water heaters, pumps, electrical distribution panels, remote load control, smart-home systems, load shedding, building automation, and industrial control panels.

Important Note

The 25A rating applies according to the specified utilization category and operating conditions. Motor and highly inductive loads generally have lower allowable switching currents than resistive loads.

The BCH8-25 family is available with different coil/control voltages, commonly including 24V, 110V, and 230V AC versions. The coil voltage must match the control supply.

Before listing or installing this product, verify the coil voltage printed on the actual BCH8-25 unit. Do not assume that every BCH8-25 has a 220/230V coil based only on the BCH8-25 model number.

Installation involves potentially hazardous mains voltage and should be carried out by a qualified person with the power disconnected and appropriate electrical protection in place.

Package Includes

1 × BCH8-25 25A 2-Pole Modular Contactor – 1NO+1NC