Robot Pi Shop

DB107 1 Amp Bridge Rectifier

$0.40

Shipping calculated at checkout.

Quantity

DB107 1A 1000V Single-Phase Bridge Rectifier – Through-Hole

The DB107 is a compact single-phase full-wave bridge rectifier designed to convert AC voltage into DC voltage.

It integrates four rectifier diodes into a single through-hole package, simplifying power-supply design compared with using four individual diodes.

With a 1A average rectified current rating and 1000V maximum repetitive reverse voltage, the DB107 is suitable for small power supplies, adapters, control circuits, chargers, electronic equipment and general AC-to-DC rectification applications.

Technical Specifications

  • Part Number: DB107
  • Device Type: Single-Phase Bridge Rectifier
  • Rectifier Configuration: Full-Wave Bridge
  • Average Rectified Output Current: 1A
  • Maximum Repetitive Peak Reverse Voltage (VRRM): 1000V
  • Maximum DC Blocking Voltage: 1000V
  • Maximum RMS Input Voltage: 700V
  • Maximum Forward Voltage Drop: Approx. 1.1V per diode at 1A
  • Peak Surge Current: Typically 30–50A depending on manufacturer
  • Operating Junction Temperature: -55°C to +150°C
  • Package: DB-1 / DB-M Style
  • Number of Pins: 4
  • Mounting Type: Through-Hole
  • Construction: Glass-Passivated Silicon

Full-Wave AC to DC Rectification

The DB107 contains four internally connected diodes arranged as a bridge rectifier.

It provides four connections:

~ AC Input

~ AC Input

+ Positive DC Output

− Negative DC Output

An AC voltage is applied to the two ~ terminals, and the rectified DC output is obtained from the + and − terminals.

Compact 4-Diode Solution

A traditional full-wave bridge rectifier requires four separate diodes.

The DB107 integrates all four into one compact package, providing:

  • Simpler PCB Layout
  • Fewer Components
  • Easier Assembly
  • Correct Internal Diode Configuration
  • Compact Circuit Design

1A Current Rating

The DB107 is rated for an average rectified output current of up to 1A under specified thermal conditions.

Actual usable current depends on factors such as:

  • Ambient Temperature
  • PCB Layout
  • Cooling
  • Input Waveform
  • Load Type
  • Capacitor Size

For capacitive-input power supplies, appropriate derating should be considered because charging capacitors can produce high peak currents.

1000V Reverse Voltage Rating

The DB107 provides a maximum repetitive peak reverse voltage rating of:

1000V

This high reverse-voltage capability makes it useful in a wide variety of low-current rectifier circuits.

Typical Applications

Ideal for:

  • AC-to-DC Power Supplies
  • Small Linear Power Supplies
  • Battery Chargers
  • Control Circuits
  • Electronic Equipment
  • Power Adapters
  • DIY Electronics
  • Rectifier Circuits
  • Transformer-Based Power Supplies
  • Industrial Control Electronics
  • Educational Electronics
  • PCB Prototyping

Using with a Filter Capacitor

The output of a bridge rectifier is pulsating DC, not smooth regulated DC.

A filter capacitor can be connected across the DC output to reduce ripple.

Additional voltage regulation may be required when a stable DC supply voltage is needed.

Important Voltage Drop

During normal full-wave bridge operation, current passes through two internal diodes simultaneously.

Because each diode has a forward voltage drop, the available DC output voltage will be lower than the AC waveform's peak voltage.

This voltage drop and transformer regulation should be considered when designing a power supply.

Important Safety Note

The 1000V rating is the device's reverse-voltage capability and does not mean that working with 1000V is safe or that every circuit can operate at that voltage.

When the DB107 is used with mains electricity, dangerous and potentially lethal voltages may be present.

Appropriate isolation, fusing, insulation, PCB clearance and electrical safety practices are required.

Do not handle or modify mains-powered circuits while energized.

Package Includes

1 × DB107 1A 1000V Bridge Rectifier