Robot Pi Shop

DS3235 180 degre Servo Motor

$20.99

Shipping calculated at checkout.

Quantity

DS3235 35kg High-Torque Digital Servo Motor – 180°, Metal Gear, IP66

The DS3235 180° Digital Servo Motor is a powerful high-torque servo designed for robotics, robotic arms, RC vehicles, steering systems and automation projects requiring strong and precise position control.

With up to 35 kg·cm stall torque at 7.4V, a coreless motor, metal gear transmission, dual ball bearings and digital PWM control, the DS3235 is well suited for demanding robotic and mechanical applications.

This version provides approximately 180° position control and features an IP66-rated construction for improved protection against dust and water.

Technical Specifications

  • Model: DS3235 / DS3235MG
  • Servo Type: High-Torque Digital Servo
  • Control Angle: 180°
  • Operating Voltage: 5–7.4V DC
  • Stall Torque @ 5V: 29 kg·cm
  • Stall Torque @ 6V: 32 kg·cm
  • Stall Torque @ 7.4V: 35 kg·cm
  • Speed @ 5V: 0.13 sec/60°
  • Speed @ 6V: 0.12 sec/60°
  • Speed @ 7.4V: 0.11 sec/60°
  • Stall Current @ 5V: Approx. 1.9A
  • Stall Current @ 6V: Approx. 2.1A
  • Stall Current @ 7.4V: Approx. 2.3–3.2A depending on version
  • Control System: PWM
  • Pulse Width: 500–2500µs
  • Neutral Position: 1500µs
  • Operating Frequency: 50–330Hz
  • Dead Band: Approx. 2–3µs
  • Motor Type: Coreless
  • Gear Type: Metal
  • Output Spline: 25T
  • Bearings: Dual Ball Bearing
  • Water Resistance: IP66
  • Dimensions: Approx. 40 × 20 × 40mm
  • Weight: Approx. 60g
  • Cable Length: Approx. 300mm
  • Operating Temperature: Approx. -15°C to +70°C

High Torque – Up to 35 kg·cm

The DS3235 is designed for applications requiring significantly more torque than standard hobby servos.

Typical stall torque:

  • 29 kg·cm @ 5V
  • 32 kg·cm @ 6V
  • 35 kg·cm @ 7.4V

At 35 kg·cm, the servo produces approximately 3.43 N·m of stall torque.

The rated torque is a stall value, not a recommended continuous working load. For reliable operation and longer servo life, the actual mechanical load should remain comfortably below stall torque.

Fast Digital Servo

The DS3235 combines high torque with fast movement.

Typical no-load speed:

  • 0.13 sec/60° @ 5V
  • 0.12 sec/60° @ 6V
  • 0.11 sec/60° @ 7.4V

This makes it suitable for robotic joints and steering applications requiring both strength and responsive movement.

180° Position Control

This version provides approximately:

0–180° Position Control

The servo moves to a commanded angular position according to the incoming PWM signal.

It is a positional servo, not a continuous-rotation motor.

PWM Control

Typical control parameters are:

  • Pulse Width: 500–2500µs
  • Center Position: 1500µs
  • Operating Frequency: 50–330Hz
  • Dead Band: Approx. 2–3µs

This allows the DS3235 to be controlled by most common microcontrollers, RC receivers and servo controllers.

Coreless Motor

The DS3235 uses a coreless motor, providing good response, smooth operation and high power for its compact standard-servo size.

Combined with digital control electronics, this makes it suitable for demanding robotic movements and RC steering systems.

Metal Gear Transmission

The servo features a durable metal gear transmission designed to handle the higher mechanical forces generated by its high-torque motor.

It also uses dual ball bearings for improved output-shaft support and smoother operation.

25T Output Spline

The DS3235 uses a standard:

25-Tooth (25T) Servo Spline

This allows it to work with many compatible metal servo horns, arms and mechanical linkages designed for 25T servo outputs.

Arduino & ESP32 Compatible

The DS3235 can be controlled using:

  • Arduino UNO
  • Arduino Nano
  • Arduino Mega
  • ESP32
  • ESP8266
  • STM32
  • Raspberry Pi with Suitable PWM Control
  • PCA9685 Servo Controllers
  • RC Receivers
  • Dedicated Robot Controllers

Important Power Supply Requirement

The DS3235 is a high-current servo and should be powered from a suitable external power source.

At high mechanical load, current consumption can reach several amps.

Do not power the DS3235 directly from an Arduino or ESP32 5V/3.3V pin.

A typical connection is:

Servo V+ → External 5–7.4V Power Supply

Servo GND → External Power Supply Ground

Servo Signal → Microcontroller PWM/GPIO

Microcontroller GND → Same Common Ground

The controller and servo power supply must share a common ground.

For demanding applications, use a power supply or BEC capable of providing several amps per servo, especially when multiple servos may move simultaneously.

IP66 Protection

The DS3235 features an IP66-rated design, providing protection against dust and strong water jets when properly assembled.

IP66 does not mean the servo is designed for continuous underwater operation.

Applications

Ideal for:

  • Robotic Arms
  • Robot Joints
  • Robot Grippers
  • Humanoid Robots
  • Quadruped Robots
  • Hexapod Robots
  • Mobile Robots
  • RC Cars
  • RC Crawlers
  • RC Trucks
  • Steering Systems
  • Pan/Tilt Mechanisms
  • Mechanical Linkages
  • University Robotics Projects
  • Automation Projects
  • DIY Robotics

Important Torque Note

The 35 kg·cm specification represents stall torque.

It does not mean the servo can continuously lift a 35kg object.

The available lifting force depends on the distance between the servo shaft and the load.

For example, increasing the servo horn or arm length significantly reduces the weight that can be supported at the end of the arm.

Always include a suitable mechanical and electrical safety margin when designing a robotic joint or lifting mechanism.

Important Notes

  • This product is the 180° positional version.
  • It is not a continuous-rotation servo.
  • Use a suitable external high-current power supply.
  • Do not power the servo directly from an Arduino or ESP32 power pin.
  • Connect the controller and servo power supply grounds together.
  • 35 kg·cm is stall torque, not continuous operating torque.
  • Avoid mechanically forcing the servo beyond its travel limits.
  • IP66 does not mean the servo can operate continuously underwater.
  • Servo specifications can vary slightly between DS3235 production versions.

Package Includes

  • 1 × DS3235 35kg 180° Digital Servo Motor
  • 25T Servo Horn / Arm
  • Mounting Hardware