DTC1201 WiFi Digital Temperature Controller with LCD Display
The DTC1201 WiFi Digital Temperature Controller is a programmable thermostat designed for automatic heating and cooling control. Featuring a digital temperature display, an external NTC temperature sensor, and WiFi connectivity, it provides a convenient solution for temperature monitoring and regulation.
The controller automatically switches connected heating or cooling equipment according to the configured temperature settings, helping maintain the desired temperature in various applications.
Its compact design, adjustable settings, and external temperature probe make it suitable for temperature-controlled equipment, environmental monitoring, and DIY automation projects.
Key Features
-
WiFi Connectivity: Wireless connectivity for supported remote monitoring and control functions.
-
Digital Temperature Display: Displays the measured temperature and controller status.
-
Heating and Cooling Control: Supports temperature-based switching of compatible equipment.
-
External NTC Sensor: Includes a wired temperature probe for accurate placement.
-
Adjustable Temperature Settings: Configure temperature thresholds using the onboard buttons.
-
Automatic Temperature Regulation: Controls connected equipment according to the selected settings.
-
Relay Output: Supports switching compatible electrical loads.
-
Wide Temperature Range: Measures temperatures from -40°C to +99°C.
-
Compact Design: Suitable for integration into temperature-control installations.
Technical Specifications
| Parameter |
Specification |
| Model |
DTC1201 |
| Product Type |
WiFi Digital Temperature Controller |
| Power Supply |
AC 110–230V |
| Temperature Range |
-40°C to +99°C |
| Temperature Sensor |
NTC Thermistor |
| Sensor Cable Length |
100cm |
| Display |
Digital Temperature Display |
| Control Modes |
Heating / Cooling |
| Relay Contact Rating |
10A at 250V AC |
| Temperature Settings |
Adjustable |
| Wireless Connectivity |
WiFi |
| Dimensions |
93 × 56 × 85mm |
| Configuration |
Onboard Control Buttons |
Operating Principle
The DTC1201 uses an external NTC temperature sensor to measure the temperature of the monitored environment.
Heating Mode
- The controller activates the heating output when the temperature falls below the configured switching threshold.
- The output switches off when the selected upper threshold is reached.
Cooling Mode
- The controller activates the cooling output when the temperature rises above the configured switching threshold.
- The output switches off when the selected lower threshold is reached.
The switching behavior depends on the configured setpoint, hysteresis, and operating mode.
Temperature Configuration
The controller includes onboard buttons for adjusting operating parameters.
- Power on the temperature controller.
-
Press and hold the S button for more than 3 seconds to enter the parameter settings.
- Navigate through the available parameter menus.
- Use the adjustment buttons to modify the selected parameter.
- Confirm and save the required settings.
- Return to normal operation.
The controller automatically regulates the connected equipment according to the configured parameters.
Applications
- Heating and Cooling Systems
- Temperature-Controlled Cabinets
- Greenhouse Temperature Regulation
- Incubators and Environmental Chambers
- Aquarium Temperature Control
- Ventilation Systems
- Industrial Temperature Monitoring
- DIY Temperature Automation
- Electronic Equipment Cooling
Important Notes
-
Power Supply: Requires AC 110–230V. Installation must be performed with appropriate electrical safety precautions.
-
Relay Rating: Maximum stated contact rating is 10A at 250V AC. Inductive loads such as compressors and motors may require a suitably rated contactor.
-
Temperature Sensor: Uses an external NTC sensor with a 1-meter cable.
-
WiFi Functions: The supported mobile application, wireless frequency, and remote-control features should be confirmed for the exact DTC1201 version.
-
Temperature Accuracy: The original product information contains corrupted accuracy values, so no specific accuracy rating is claimed.
-
Installation: Use appropriate circuit protection and an electrical enclosure where required.
-
Sensor Placement: Position the probe away from direct heat sources or airflow that could affect temperature measurements.
-
Safety: Not intended as the sole safety controller for critical heating or cooling systems.
Package Includes
- 1 × DTC1201 WiFi Digital Temperature Controller
- 1 × External NTC Temperature Sensor with 100cm Cable
- 1 × WiFi Antenna