GY-30 BH1750 Digital Light Intensity Sensor Module – I²C
The GY-30 BH1750 Digital Light Intensity Sensor Module is a compact, high-precision ambient light sensor designed to measure surrounding light intensity in lux (lx).
Powered by the BH1750FVI digital light sensor IC, the module provides accurate light measurements through an I²C interface, making it easy to integrate with Arduino, ESP32, ESP8266, Raspberry Pi, STM32, and other development boards.
Unlike traditional light-dependent resistors (LDRs), the BH1750 provides a calibrated digital output, eliminating the need for an external analog-to-digital converter (ADC).
It is ideal for automatic lighting systems, smart home applications, environmental monitoring, robotics, and IoT projects.
Key Features
-
Sensor IC: BH1750FVI
-
Module Model: GY-30
-
Sensor Type: Digital Ambient Light Sensor
-
Measurement Unit: Lux (lx)
-
Measurement Range: Approximately 1–65,535 lux in standard operation
-
Communication Interface: I²C
-
I²C Address: 0x23 or 0x5C (Selectable)
-
Spectral Response: Close to Human Eye Sensitivity
-
Resolution: Down to 0.5 lux in High-Resolution Mode
-
Power Supply: Typically 3.3–5V DC for regulated GY-30 modules
-
Low Power Consumption: Suitable for Battery-Powered Applications
-
Digital Output: No External ADC Required
Technical Specifications
| Parameter |
Specification |
| Module |
GY-30 |
| Sensor IC |
BH1750FVI |
| Sensor Type |
Digital Ambient Light Sensor |
| Measurement Unit |
Lux (lx) |
| Typical Measurement Range |
1–65,535 lux |
| Communication |
I²C |
| Default I²C Address |
0x23 |
| Alternative I²C Address |
0x5C |
| Sensor IC Supply Voltage |
2.4–3.6V DC |
| Module Supply Voltage |
Typically 3.3–5V DC, depending on breakout design |
| Resolution |
0.5 lux in High-Resolution Mode 2 |
| High-Resolution Measurement Time |
Approximately 120ms |
| Low-Resolution Measurement Time |
Approximately 16ms |
| Sensor Operating Temperature |
-40°C to +85°C |
| Output Format |
16-Bit Digital Data |
Measurement Modes
The BH1750 supports multiple measurement modes for balancing resolution, speed, and power consumption.
High-Resolution Mode
- Resolution: 1 lux
- Typical Measurement Time: 120ms
- Suitable for accurate ambient light measurements
High-Resolution Mode 2
- Resolution: 0.5 lux
- Typical Measurement Time: 120ms
- Suitable for detecting smaller changes in light intensity
Low-Resolution Mode
- Resolution: 4 lux
- Typical Measurement Time: 16ms
- Suitable for faster light measurements
The sensor supports both continuous measurement and one-time measurement modes.
I²C Communication
The GY-30 communicates through the I²C digital interface, requiring only two communication lines.
Pin Configuration
| Pin |
Function |
| VCC |
Power Supply |
| GND |
Ground |
| SCL |
I²C Clock |
| SDA |
I²C Data |
| ADDR |
I²C Address Selection |
I²C Address Selection
-
ADDR Low: 0x23 (Default)
-
ADDR High: 0x5C
The selectable I²C address allows two BH1750 sensors to be connected to the same I²C bus without address conflicts.
Arduino Compatibility
The GY-30 can be connected to Arduino boards using the I²C interface.
Typical Arduino UNO connections:
- VCC → 5V (for a 5V-compatible GY-30 breakout)
- GND → GND
- SDA → A4
- SCL → A5
Compatible BH1750 libraries are available for the Arduino IDE.
ESP32 Compatibility
The module can be used with ESP32 development boards for digital light monitoring.
Typical ESP32 connections:
- VCC → 3.3V
- GND → GND
- SDA → GPIO21
- SCL → GPIO22
These are common default I²C pins on classic ESP32 development boards; other ESP32 variants may use different pins.
Raspberry Pi Compatibility
The GY-30 can connect directly to the Raspberry Pi's I²C interface when using compatible 3.3V logic levels.
Typical Raspberry Pi connections:
- VCC → 3.3V
- GND → GND
- SDA → GPIO2 (Pin 3)
- SCL → GPIO3 (Pin 5)
No external ADC is required.
Applications
Ideal for:
- Automatic Lighting Systems
- Smart Home Automation
- Ambient Light Monitoring
- Automatic Display Brightness Control
- IoT Environmental Monitoring
- Weather Stations
- Robotics Projects
- Smart Agriculture
- Indoor Lighting Measurement
- Energy-Saving Lighting Systems
- Arduino Projects
- ESP32 Projects
- Raspberry Pi Projects
- Educational Projects
- University Projects
- DIY Electronics
Advantages
- Accurate Digital Light Measurement
- Output Directly in Lux
- Compact and Lightweight Design
- I²C Communication
- Selectable I²C Address
- Multiple Measurement Modes
- Low Power Consumption
- No External ADC Required
- Easy Integration with Microcontrollers
- Suitable for Continuous Ambient Light Monitoring
Important Notes
-
The BH1750 measures ambient light intensity, not distance, color, or ultraviolet radiation.
-
The sensor IC operates at 2.4–3.6V. A 5V supply is suitable only for GY-30 breakout boards with appropriate voltage regulation.
- Confirm the module's I²C pull-up voltage before connecting it to a 3.3V microcontroller.
- The stated measurement range is a commonly used standard operating range; the effective range depends on the selected measurement mode and measurement-time setting.
- Avoid covering the sensor's optical sensing area.
- Strong directional lighting and installation angle may influence readings.
- The sensor is suitable for general light monitoring but is not a certified professional lux meter.
Package Includes
1 × GY-30 BH1750 Digital Light Intensity Sensor Module