HDMI to USB 3.0 Video Capture Card – 1080P 60FPS
The HDMI to USB 3.0 Video Capture Card is a compact video capture device designed to transfer HDMI video and audio signals from cameras, gaming consoles, video equipment, and other HDMI sources to a computer for recording, live streaming, and video processing.
Featuring a high-speed USB 3.0 interface, this capture device supports Full HD video capture and is suitable for online broadcasting, video conferencing, educational recording, and multimedia production.
The device supports standard video capture interfaces on Windows, Linux, and macOS, allowing integration with compatible recording and streaming software.
Key Features
-
HDMI Video Capture: Converts HDMI video and audio signals into a USB video capture stream.
-
Full HD Capture: Advertised support for video capture up to 1080P at 60FPS.
-
USB 3.0 Interface: High-speed connection for video transmission to a computer.
-
USB 2.0 Compatibility: Supports connection through USB 2.0 with reduced available bandwidth.
-
Audio and Video Capture: Suitable for recording HDMI video with embedded audio.
-
Software Compatibility: Supports compatible video capture and streaming applications.
-
Multiple Operating Systems: Designed for Windows, Linux, and macOS systems.
-
Compact Design: Suitable for desktop recording setups and portable applications.
Technical Specifications
| Parameter |
Specification |
| Product Type |
HDMI to USB Video Capture Device |
| Video Input |
HDMI |
| Host Interface |
USB 3.0 |
| USB Compatibility |
USB 2.0 |
| Advertised Capture Resolution |
Up to 1920 × 1080 |
| Advertised Frame Rate |
Up to 60FPS |
| Audio Input |
Embedded HDMI Audio |
| USB 3.0 Listed Throughput |
300–350 MB/s |
| USB 2.0 Listed Throughput |
Approximately 40 MB/s |
| Windows Capture Interface |
DirectShow |
| Linux Capture Interface |
Video4Linux2 (V4L2) |
| macOS Capture Interface |
QuickTime-Compatible Capture |
| Linux Support |
Driver and kernel dependent |
| Power Source |
USB Host Connection |
Maximum capture resolution and frame rate should be confirmed for the specific hardware revision. USB 2.0 operation may limit available capture modes.
Connection Guide
- Connect an HDMI video source to the capture device's HDMI input.
- Connect the capture device to a compatible computer using USB.
- Open compatible video capture or streaming software.
- Select the USB video capture device as the video source.
- Configure the supported resolution and frame rate.
- Start recording, streaming, or previewing the HDMI video signal.
Applications
- Live Streaming and Broadcasting
- Camera Video Capture
- Gaming Video Recording
- Educational Video Production
- Online Presentations
- Video Conferencing
- HDMI Equipment Testing
- Multimedia Recording
- Embedded Linux Video Capture Projects
Software Compatibility
The capture device is intended for use with software supporting standard USB video capture interfaces, including:
- OBS Studio
- VLC Media Player
- Windows DirectShow-Compatible Applications
- Linux V4L2-Compatible Applications
- macOS QuickTime-Compatible Applications
Compatibility depends on the operating system, capture-device firmware, and supported video formats.
Important Notes
-
This device captures HDMI signals and transfers them to a computer through USB. It is not an HDMI-to-USB display adapter.
- The HDMI source must provide an unencrypted signal. HDCP-protected video cannot normally be captured.
- USB 3.0 is recommended for higher-resolution and higher-frame-rate recording.
- USB 2.0 operation may reduce capture performance.
- Raspberry Pi and other Linux single-board computer compatibility should be verified using the device's USB video class support.
- The HDMI input resolution and actual USB capture output resolution may differ.
- The device does not necessarily provide HDMI passthrough or an HDMI output.
- A compatible USB connection cable may be required depending on the device connector.
Package Includes