HLK-LD2410 24GHz Human Presence Detection Radar Sensor Module – UART & GPIO
The HLK-LD2410 is a compact, high-sensitivity 24GHz mmWave radar sensor designed to detect human presence, movement, and small body movements.
Unlike traditional PIR motion sensors, the LD2410 can detect both moving and relatively stationary people, making it ideal for smart lighting, home automation, occupancy detection, and IoT projects.
Using FMCW radar technology, the module provides real-time presence detection and distance information through UART and GPIO interfaces.
It is suitable for integration with Arduino, ESP32, Raspberry Pi, STM32, and other development platforms.
Key Features
-
Brand: Hi-Link
-
Model: HLK-LD2410
-
Sensor Type: 24GHz mmWave Human Presence Radar
-
Detection: Moving and Stationary Human Presence
-
Radar Frequency: 24–24.25GHz
-
Detection Distance: Up to 5m in typical applications
-
Maximum Configurable Range: Up to 6m
-
Detection Angle: ±60°
-
Distance Resolution: 0.75m
-
Operating Voltage: 5–12V DC
-
Recommended Supply: 5V DC
-
Average Current: Approximately 80mA
-
Communication: UART and GPIO
-
Logic Level: 3.3V
- Adjustable Detection Sensitivity
- Configurable Detection Distance and Delay
-
Compact Design: 7 × 35mm
Technical Specifications
| Parameter |
Specification |
| Manufacturer |
Hi-Link |
| Model |
HLK-LD2410 |
| Sensor Technology |
FMCW mmWave Radar |
| Operating Frequency |
24–24.25GHz |
| Detection Type |
Human Presence and Motion |
| Typical Detection Range |
Up to 5m |
| Maximum Configurable Range |
6m |
| Detection Angle |
±60° |
| Distance Resolution |
0.75m |
| Supply Voltage |
5–12V DC |
| Recommended Voltage |
5V DC |
| Average Operating Current |
80mA |
| Communication Interface |
UART |
| Digital Output |
GPIO |
| Logic Level |
3.3V |
| Operating Temperature |
-40°C to +85°C |
| Module Dimensions |
7 × 35mm |
Human Presence Detection
The HLK-LD2410 can detect:
- Moving People
- Walking Motion
- Small Body Movements
- Relatively Stationary Human Presence
- Human Occupancy Within the Detection Area
Its radar technology makes it suitable for applications where conventional PIR sensors may stop detecting a person who remains seated or moves very little.
Adjustable Detection Settings
The module supports configuration of:
- Maximum Detection Distance
- Motion Detection Sensitivity
- Stationary Presence Sensitivity
- Sensitivity at Different Distance Intervals
- No-Presence Output Delay
These settings allow the sensor to be adapted to different indoor environments.
Communication & Pin Configuration
The module supports UART serial communication and a digital presence output.
| Pin |
Function |
| VCC |
Power Supply |
| GND |
Ground |
| TX |
UART Transmit |
| RX |
UART Receive |
| OUT |
Digital Human Presence Output |
The OUT pin provides a simple HIGH/LOW signal indicating whether human presence is detected.
UART communication provides additional information, including detection status and estimated target distance.
Compatibility
Arduino: Compatible through UART or digital GPIO. Use suitable 3.3V logic-level interfacing when connecting to 5V Arduino boards.
ESP32: Compatible through UART and GPIO using 3.3V logic levels.
Raspberry Pi: Compatible through 3.3V UART or GPIO interfaces.
STM32: Compatible with suitable UART-enabled microcontrollers.
The module requires a separate 5V supply or another supported supply voltage and must not be powered directly from a 3.3V GPIO pin.
Applications
- Smart Home Automation
- Automatic Lighting Systems
- Human Presence Detection
- Room Occupancy Monitoring
- Smart Office Systems
- Energy-Saving Lighting
- Security and Monitoring Systems
- Contactless Automation
- IoT Projects
- Arduino Projects
- ESP32 Projects
- Raspberry Pi Projects
- Robotics and Embedded Systems
Important Notes
- The HLK-LD2410 detects human presence using radar; it does not capture images or identify individuals.
- Detection performance depends on installation position, sensitivity settings, surrounding objects, and environmental conditions.
- Radar signals can pass through certain non-metallic materials, which may cause detection outside the intended area.
- The sensor does not provide precise position tracking or individual identification.
-
The standard HLK-LD2410 supports UART and GPIO. Bluetooth support should not be assumed; Bluetooth-enabled variants such as the LD2410B are separate models.
- This module is intended primarily for indoor presence detection.
Package Includes
1 × HLK-LD2410 24GHz Human Presence Detection Radar Sensor Module