HX711 Load Cell Amplifier Module – 24-Bit ADC Weight Sensor
The HX711 Load Cell Amplifier Module is a high-precision, 24-bit analog-to-digital converter (ADC) designed for electronic weighing scales and load cell applications.
It amplifies the small electrical signals from strain gauge load cells and converts them into digital data that can be read by Arduino, ESP32, Raspberry Pi, and other microcontrollers.
Key Features
- Chip: HX711
- Resolution: 24-Bit ADC
- Operating Voltage: 2.6–5.5V DC
- Interface: 2-Wire Digital (DT and SCK)
- Sampling Rate: 10 or 80 Samples per Second
- Channels: 2 Differential Input Channels
- Programmable Gain: 32, 64, or 128
- Compatible Sensors: Strain Gauge Load Cells
- Low Power Consumption
- Compact Design
Technical Specifications
| Parameter | Specification |
|---|---|
| Module Type | Load Cell Amplifier |
| IC | HX711 |
| ADC Resolution | 24-Bit |
| Operating Voltage | 2.6–5.5V DC |
| Input Channels | 2 Differential Channels |
| Channel A Gain | 64 or 128 |
| Channel B Gain | 32 |
| Sampling Rate | 10 / 80 SPS |
| Communication | Digital DT and SCK |
| Sensor Compatibility | Wheatstone Bridge Load Cells |
Pin Configuration
| Pin | Function |
|---|---|
| VCC | Power Supply |
| GND | Ground |
| DT / DOUT | Digital Data Output |
| SCK | Serial Clock Input |
| E+ | Load Cell Excitation Positive |
| E- | Load Cell Excitation Negative |
| A+ | Channel A Positive Input |
| A- | Channel A Negative Input |
Applications
- Digital Weighing Scales
- Electronic Weight Measurement
- Industrial Weighing Systems
- Force Measurement
- Smart IoT Scales
- Arduino and ESP32 Projects
- Raspberry Pi Projects
- Load Cell Monitoring Systems
Important Notes
- Requires an external load cell sensor (sold separately).
- Calibration is necessary for accurate weight measurements.
- For ESP32 and Raspberry Pi, use a suitable 3.3V logic-level configuration.
- The maximum measurable weight depends on the connected load cell, not the HX711 module.
Package Includes
1 × HX711 Load Cell Amplifier Module