Robot Pi Shop

IRF 840 N-Channel Power MOSFET

$0.50

Shipping calculated at checkout.

Quantity

IRF840 N-Channel Power MOSFET – 500V 8A TO-220

The IRF840 is a high-voltage N-Channel power MOSFET designed for electronic switching, power control, and high-voltage applications.

Featuring a maximum drain-to-source voltage of 500V and a continuous drain current rating of 8A, it is suitable for switching power supplies, motor control circuits, inverters, and industrial electronics when driven with an appropriate gate voltage.

Key Features

  • Model: IRF840
  • Transistor Type: N-Channel Power MOSFET
  • Maximum Drain-to-Source Voltage: 500V
  • Continuous Drain Current: Up to 8A
  • Drain-to-Source On-Resistance: 0.85Ω (at VGS = 10V)
  • Gate Threshold Voltage: 2–4V
  • Maximum Gate-to-Source Voltage: ±20V
  • Package: TO-220
  • Suitable for High-Voltage Switching Applications

Technical Specifications

Parameter Specification
Model IRF840
MOSFET Type N-Channel
Drain-to-Source Voltage (VDS) 500V
Continuous Drain Current (ID) 8A
On-Resistance (RDS(on)) 0.85Ω at VGS = 10V
Gate Threshold Voltage (VGS(th)) 2–4V
Maximum Gate-to-Source Voltage ±20V
Package Type TO-220
Mounting Type Through-Hole

Pin Configuration

With the front marking facing you and the leads pointing downward:

Pin Function
1 Gate (G)
2 Drain (D)
3 Source (S)

The metal mounting tab is electrically connected to the Drain.

Applications

  • Switching Power Supplies (SMPS)
  • High-Voltage Switching Circuits
  • DC Motor Control
  • Power Inverters
  • Industrial Power Control
  • Electronic Load Switching
  • PWM Switching Applications
  • DIY Electronics Projects

Important Notes

  • The IRF840 is not a logic-level MOSFET.
  • A gate drive of approximately 10V is recommended for proper switching performance.
  • Direct control from 3.3V ESP32 or Raspberry Pi GPIO is not recommended.
  • A 5V Arduino output may not fully turn on the MOSFET.
  • The 8A current rating depends on operating temperature and adequate heat dissipation.
  • The metal mounting tab is connected to the Drain and may carry hazardous voltage.
  • Use a suitable MOSFET gate driver and appropriate protection circuitry for high-voltage applications.
  • Use a flyback diode or suitable suppression circuit when switching inductive loads.

Package Includes

1 × IRF840 N-Channel Power MOSFET TO-220