ISD1760 Voice Recording and Playback Module
The ISD1760 Voice Recording and Playback Module is a compact audio recording board designed to record, store, and play back voice messages and sound effects. Based on the ISD1760 voice recording IC, the module provides a convenient solution for DIY electronics, robotics, voice announcements, and interactive audio projects.
The module supports approximately 60 to 75 seconds of audio recording, depending on the selected sampling frequency. Recorded audio is stored in the chip's internal non-volatile flash memory, allowing messages to be retained even when power is disconnected.
With onboard push buttons, an integrated microphone, and SPI communication support, the ISD1760 can operate independently or be controlled by a microcontroller such as Arduino.
Key Features
-
Voice Recording and Playback: Record and replay voice messages and sound effects.
-
Up to 75 Seconds Recording: Approximately 75 seconds at 6 kHz or 60 seconds at 8 kHz.
-
Non-Volatile Memory: Recorded audio remains stored after power is removed.
-
Adjustable Sampling Frequency: Supports 6 kHz or 8 kHz sampling configurations.
-
Onboard Microphone: Allows direct voice recording without requiring a separate microphone.
-
Push-Button Operation: Record, play, erase, and navigate recorded messages using onboard controls.
-
SPI Communication: Supports microcontroller-based operation and advanced configuration.
-
Multiple Message Storage: Supports recording and managing multiple audio messages within the available memory.
-
Status Indicators: Onboard LEDs indicate power and operating status.
-
Audio Output: Provides a connection for an external speaker.
Technical Specifications
| Parameter |
Specification |
| Model |
ISD1760 |
| Product Type |
Voice Recording and Playback Module |
| Main IC |
ISD1760 |
| Operating Voltage |
2.4–5.5V DC (IC operating range) |
| Recording Duration |
Approximately 60–75 seconds |
| Sampling Frequency |
6 kHz / 8 kHz |
| Audio Storage |
Internal Non-Volatile Flash Memory |
| Recording Method |
Analog Voice Recording |
| Control Methods |
Onboard Push Buttons / SPI |
| Microphone |
Onboard Electret Microphone |
| Audio Output |
External Speaker Connection |
| Status Indicators |
Power LED and IC Status LED |
| Microcontroller Compatibility |
Arduino and Other SPI-Capable Controllers |
Control and Operation
The ISD1760 module provides two methods of operation.
1. Manual Push-Button Control
The onboard buttons allow users to perform basic audio operations without programming.
-
REC: Record a voice message.
-
PLAY: Play a recorded message.
-
ERASE: Delete recorded audio.
-
FWD: Navigate to the next recorded message.
-
VOL: Adjust playback volume where supported by the board configuration.
2. Microcontroller Control via SPI
The module supports SPI communication, allowing an Arduino or compatible microcontroller to control recording and playback functions programmatically.
SPI control enables more advanced operations, including message selection, playback control, and audio configuration.
Arduino Connection
The module can communicate with Arduino through its SPI interface.
| ISD1760 Signal |
Arduino UNO |
| VCC |
Compatible Power Supply |
| GND |
GND |
| SCLK |
D13 (SCK) |
| MOSI |
D11 (MOSI) |
| MISO |
D12 (MISO) |
| SS / CS |
D10 (Chip Select) |
Note: Confirm the module's actual pin labels and supply requirements before wiring. Some boards expose additional control and status signals.
Applications
- Voice Announcement Systems
- Arduino Audio Projects
- Interactive Robotics
- DIY Voice Message Recorders
- Electronic Toys
- Sound-Activated Demonstrations
- Educational Electronics Projects
- Custom Audio Notification Systems
- Embedded Audio Playback Devices
Important Notes
- Recording duration depends on the configured sampling frequency.
- Audio quality is intended primarily for voice messages and simple sound effects rather than high-fidelity music.
- Recorded audio is retained when power is disconnected.
- The module records audio directly through its microphone and does not require an SD card.
- SPI communication requires appropriate software commands and correct electrical connections.
- The operating voltage listed refers to the ISD1760 IC. Verify the assembled board's recommended supply voltage before connecting power.
- The module is an audio recorder and playback device, not a speech recognition module. It cannot interpret spoken commands.
Package Includes