KY-003 Hall Effect Magnetic Sensor Module – Digital Magnetic Field Detection
The KY-003 Hall Effect Magnetic Sensor Module is a compact electronic sensor designed to detect the presence of a magnetic field without physical contact.
Featuring a digital Hall effect sensor, commonly the A3144, the module provides a digital output when a suitable magnetic field is detected.
It is ideal for Arduino, ESP32, Raspberry Pi, robotics, motor speed detection, position sensing, and DIY electronics projects.
Key Features
-
Model: KY-003
-
Sensor Type: Digital Hall Effect Magnetic Sensor
-
Sensor IC: A3144 or Compatible
-
Detection Type: Magnetic Field
-
Output Type: Digital (HIGH/LOW)
-
Operating Voltage: 3.3V–5V DC (Module Dependent)
-
3-Pin Interface: Signal (S), VCC (+), GND (-)
- Non-Contact Magnetic Detection
- Compact and Lightweight Design
- Easy Integration with Microcontrollers
Technical Specifications
| Parameter |
Specification |
| Model |
KY-003 |
| Product Type |
Hall Effect Magnetic Sensor Module |
| Sensor IC |
A3144 or Compatible |
| Sensor Technology |
Hall Effect |
| Operating Voltage |
3.3V–5V DC (Verify Module Version) |
| Output Type |
Digital |
| Detection Method |
Magnetic Field |
| Typical Output Behavior |
Active LOW |
| Number of Pins |
3 |
| Pin Configuration |
S / + / - |
| Board Dimensions |
Approximately 18.5 × 15mm |
| Sensitivity Adjustment |
Not Available |
Pin Configuration
| Pin |
Function |
| S |
Digital Signal Output |
| + |
Power Supply |
| - |
Ground |
Arduino Connection Example
| KY-003 |
Arduino Uno |
| S |
D3 |
| + |
5V |
| - |
GND |
When a suitable magnetic field is detected, the module typically pulls its digital output LOW. When the magnetic field is removed, the output returns HIGH through a pull-up resistor.
Applications
- Magnetic Field Detection
- Motor Speed Measurement
- RPM Counters
- Position Detection
- Door and Window Sensors
- Robotics and Automation
- Arduino and ESP32 Projects
- Contactless Switching
- Educational Electronics
Important Notes
- The KY-003 detects magnetic fields but does not measure magnetic field strength.
- The A3144 is typically sensitive to one magnetic polarity, so magnet orientation matters.
- Detection distance depends on magnet strength and positioning.
- Some KY-003 modules require an external or internal pull-up resistor for proper digital output operation.
-
For ESP32 and Raspberry Pi, ensure the output signal does not exceed 3.3V.
- The operating voltage and sensor IC may vary between manufacturers. Verify the actual module before applying 3.3V power.
Package Includes
1 × KY-003 Hall Effect Magnetic Sensor Module