TTGO Lora

LILYGO TTGO LoRa32 V1.0 ESP32 Development Board – 915MHz with OLED Display

$25.99

Shipping calculated at checkout.

Quantity

LILYGO TTGO LoRa32 V1.0 ESP32 Development Board – 915MHz with OLED Display

The LILYGO TTGO LoRa32 V1.0 is a compact ESP32-based development board combining 915MHz LoRa wireless communication, WiFi, Bluetooth, and a 0.96-inch OLED display in a single platform.

Designed for IoT applications, wireless sensor networks, remote monitoring, and long-range communication projects, this board provides a convenient solution for developing connected electronic systems.

The integrated ESP32 microcontroller offers processing power and wireless connectivity, while the LoRa transceiver enables low-power, long-distance data transmission between compatible LoRa devices.

An external antenna is included for 915MHz LoRa communication.

Key Features

  • ESP32 Microcontroller: Dual-core processor suitable for IoT and embedded applications.
  • 915MHz LoRa Communication: Long-range wireless data transmission using compatible LoRa devices.
  • Built-in WiFi: Supports 2.4GHz wireless networking.
  • Bluetooth Connectivity: ESP32 Bluetooth Classic and BLE capabilities.
  • 0.96-Inch OLED Display: Displays sensor readings, device status, and communication information.
  • External LoRa Antenna: Included for wireless communication.
  • MicroSD Support: V1.0 board variant advertised with SD card functionality; verify the installed slot before use.
  • USB Programming: Supports firmware uploading and serial communication.
  • Arduino IDE Compatibility: Programmable using the ESP32 Arduino framework.
  • ESP-IDF Support: Suitable for advanced ESP32 firmware development.
  • Compact Design: Ideal for portable and embedded wireless projects.

Technical Specifications

Parameter Specification
Brand LILYGO / TTGO
Model LoRa32 V1.0
Microcontroller ESP32
Processor Dual-Core Xtensa LX6
Wireless LoRa Frequency 915MHz
LoRa Technology Sub-GHz LoRa
WiFi 2.4GHz IEEE 802.11 b/g/n
Bluetooth Bluetooth Classic / BLE
Display 0.96-Inch OLED
Display Resolution Typically 128 × 64 Pixels
Display Interface I2C
LoRa Interface SPI
Logic Voltage 3.3V
Programming Arduino IDE / ESP-IDF
USB Interface USB Programming and Serial Communication
Antenna External LoRa Antenna
SD Card Support Variant-Dependent

Communication Interfaces

The ESP32 supports several interfaces for connecting external components.

Interface Application
SPI LoRa Transceiver and External Peripherals
I2C OLED Display and Sensors
UART Serial Communication
GPIO Digital Input and Output
ADC Analog Sensor Input
PWM LED and Motor Control Signals

Note: Some ESP32 GPIO pins are internally assigned to the LoRa transceiver and OLED display. Available pins depend on the board revision.

Applications

  • Long-Range IoT Communication
  • LoRa Wireless Sensor Networks
  • Remote Environmental Monitoring
  • Smart Agriculture Systems
  • Wireless Data Logging
  • Industrial Monitoring Prototypes
  • Home Automation Projects
  • Remote Weather Stations
  • GPS Tracking Projects (with External GPS Module)
  • ESP32 and LoRa Educational Projects

Important Notes

  • This is the 915MHz version. Ensure that the operating frequency is permitted under applicable local radio regulations.
  • LoRa communication requires another compatible LoRa device or gateway.
  • LoRaWAN operation requires appropriate firmware and network infrastructure.
  • The board uses 3.3V logic. Do not connect 5V signals directly to ESP32 GPIO pins.
  • Connect the supplied LoRa antenna before transmitting.
  • The OLED display and LoRa transceiver use GPIO connections that vary between hardware revisions.
  • MicroSD functionality must be verified against the actual V1.0 PCB revision.
  • This board does not provide cellular connectivity.
  • Communication range depends on antenna placement, transmit power, terrain, interference, and local regulations.

Package Includes

  • 1 × LILYGO TTGO LoRa32 V1.0 ESP32 Development Board – 915MHz
  • 1 × External LoRa Antenna
  • 1 × Antenna Connection Cable