LM324 Quad Operational Amplifier IC – Low-Power, 14-Pin DIP
The LM324 is a low-power, general-purpose operational amplifier (Op-Amp) integrated circuit containing four independent operational amplifiers in a single 14-pin DIP package.
Designed for both single-supply and dual-supply operation, the LM324 is widely used in signal amplification, sensor conditioning, voltage comparison, active filters, and analog electronic circuits.
Its low power consumption and ability to operate from a single power supply make it suitable for Arduino projects, educational electronics, industrial control circuits, and DIY applications.
Key Features
- Four independent operational amplifiers in one IC
- Low power consumption
- Single or dual power supply operation
- Wide supply voltage range
- Input common-mode voltage range includes ground during single-supply operation
- Internally frequency compensated
- Suitable for analog signal amplification
- Compatible with breadboards and through-hole PCBs
- Standard 14-pin DIP package
- Ideal for sensor interfaces and analog circuit development
Technical Specifications
| Parameter |
Specification |
| Model |
LM324 |
| Component Type |
Quad Operational Amplifier |
| Number of Amplifiers |
4 |
| Package |
DIP-14 |
| Supply Voltage (Single) |
Typically 3V to 32V |
| Supply Voltage (Dual) |
Typically ±1.5V to ±16V |
| Typical Supply Current |
Approximately 0.7mA Total at 5V, Variant Dependent |
| Gain Bandwidth Product |
Approximately 1MHz |
| Slew Rate |
Approximately 0.5V/µs |
| Input Offset Voltage |
Typically 2mV, Variant Dependent |
| Input Bias Current |
Typically 20nA |
| Output Type |
Analog |
| Frequency Compensation |
Internal |
| Mounting Type |
Through-Hole |
| Number of Pins |
14 |
Note: Specifications are typical of common LM324 versions. Exact electrical ratings depend on the manufacturer and specific LM324 variant.
Pin Configuration
| Pin |
Function |
| 1 |
Output 1 |
| 2 |
Inverting Input 1 (−) |
| 3 |
Non-Inverting Input 1 (+) |
| 4 |
Positive Supply (VCC+) |
| 5 |
Non-Inverting Input 2 (+) |
| 6 |
Inverting Input 2 (−) |
| 7 |
Output 2 |
| 8 |
Output 3 |
| 9 |
Inverting Input 3 (−) |
| 10 |
Non-Inverting Input 3 (+) |
| 11 |
Negative Supply / Ground (VCC−) |
| 12 |
Non-Inverting Input 4 (+) |
| 13 |
Inverting Input 4 (−) |
| 14 |
Output 4 |
Applications
- Analog Signal Amplification
- Sensor Signal Conditioning
- Active Filters
- Voltage Monitoring Circuits
- Signal Processing
- Audio Signal Conditioning
- Analog Control Circuits
- Arduino Sensor Projects
- Educational Electronics
- DIY Circuit Development
- Industrial Electronic Systems
Important Notes
- The LM324 contains four independent operational amplifiers.
- It is designed for analog applications and is not a microcontroller.
-
The LM324 is not a rail-to-rail operational amplifier; its output typically cannot reach the positive supply rail.
- The input common-mode range includes ground in suitable single-supply configurations but does not extend to the positive supply rail.
- Although the LM324 can be used as a basic comparator, a dedicated comparator such as the LM339 is generally preferable for switching applications.
- It is not designed to drive motors, relays, or other high-current loads directly.
- Verify supply voltage and signal levels before connecting to an Arduino or ESP32.
- A 100nF ceramic bypass capacitor near the supply pins is recommended for stable operation.
- Check the manufacturer's datasheet for the exact voltage, current, and temperature ratings.
Package Includes
1 × LM324 Quad Operational Amplifier IC – DIP-14