LM331 Voltage-to-Frequency Converter Module – 0–10V to 0–10kHz
The LM331 Voltage-to-Frequency Converter Module is an electronic signal conversion board designed to convert an analog DC voltage input into a corresponding pulse frequency output.
Using the LM331 voltage-to-frequency conversion IC, the module converts a 0–10V analog input signal into a 0–10kHz frequency output, making it suitable for industrial automation, motor control, signal processing, and electronic measurement applications.
The module features an adjustable potentiometer for calibrating the relationship between input voltage and output frequency. It can be integrated with compatible PLCs, pulse-input motor drivers, microcontrollers, and industrial control systems.
Key Features
-
Voltage-to-Frequency Conversion: Converts a 0–10V analog signal into a corresponding 0–10kHz pulse frequency.
-
LM331-Based Design: Uses a voltage-to-frequency converter IC.
-
Adjustable Calibration: Onboard potentiometer allows adjustment of the voltage-to-frequency relationship.
-
Pulse Signal Output: Generates a frequency signal proportional to the input voltage.
-
Industrial Control Compatibility: Suitable for compatible PLCs, pulse-input controllers, and motor drivers.
-
Compact PCB Design: Easy integration into electronic control systems.
-
Screw Terminal Connections: Convenient wiring for power, signal input, and output.
Technical Specifications
| Parameter |
Specification |
| Product Type |
Voltage-to-Frequency Converter |
| Main IC |
LM331 |
| Input Signal |
Analog DC Voltage |
| Input Voltage Range |
0–10V DC |
| Output Signal |
Frequency Pulse Signal |
| Output Frequency Range |
0–10kHz |
| Module Supply Voltage |
13.5–30V DC (as stated in original listing) |
| Calibration |
Adjustable Potentiometer |
| Signal Conversion |
Voltage to Frequency |
| Connection Type |
Screw Terminals |
| Output Interface |
Pulse Signal Output |
Operating Principle
The module converts an analog voltage into a frequency signal.
As the input voltage increases, the output pulse frequency increases proportionally.
The nominal conversion relationship is:
| Input Voltage |
Output Frequency |
| 0V |
0Hz |
| 2V |
2kHz |
| 4V |
4kHz |
| 6V |
6kHz |
| 8V |
8kHz |
| 10V |
10kHz |
Note: These values represent the ideal conversion relationship. Actual results depend on calibration, circuit tolerances, and operating conditions.
Connection and Wiring
The module requires a DC power supply, an analog voltage input, and a compatible pulse-signal receiving device.
| Connection |
Function |
| Power Supply + |
Positive DC Supply |
| Power Supply − |
Ground / Negative Supply |
| Analog Input + |
0–10V Signal Input |
| Analog Input − |
Signal Ground |
| Pulse Output |
Frequency Signal Output |
Connecting to a Motor Driver
The module can provide pulse signals to compatible motor drivers that accept an external pulse input.
For a driver using a common-anode pulse input arrangement:
- Connect the module's pulse output to the driver's pulse input according to the module's output configuration.
- Connect the driver's common pulse terminal to the appropriate positive control voltage.
- Ensure the pulse input voltage and current comply with the motor driver's specifications.
Important: An external current-limiting resistor may be necessary when connecting to certain motor drivers. The original listing mentions 330Ω for a 12V connection and 2.7kΩ for a 13–24V connection. These values must be verified against the actual driver input circuit before installation.
Applications
- Industrial Automation Systems
- Analog Signal Conversion
- PLC Frequency Input Applications
- Motor Speed Control Systems
- Pulse-Input Motor Drivers
- Signal Processing Circuits
- Electronic Measurement Systems
- Frequency-Based Control Systems
- DIY Electronics and Engineering Projects
Important Notes
- This module converts analog voltage into pulse frequency; it is not a frequency-to-voltage converter.
- The module requires an external DC power supply.
- Calibrate the onboard potentiometer before applications requiring accurate frequency output.
- Output electrical characteristics must be checked before connecting directly to Arduino, ESP32, Raspberry Pi, or other microcontrollers.
- A pulse signal may require a level shifter, optocoupler, or suitable interface circuit depending on the receiving device.
- The output frequency does not directly determine motor speed unless the connected controller is configured to interpret it accordingly.
- The nominal voltage-to-frequency relationship is not a guarantee of measurement accuracy.
Package Includes