Robot Pi Shop

LM741- Operational Amplifier

$0.50

Shipping calculated at checkout.

Quantity

LM741 Operational Amplifier IC – Single Op-Amp, DIP-8

The LM741 Operational Amplifier is a general-purpose, high-gain operational amplifier integrated circuit designed for analog signal amplification, signal conditioning, active filters, and electronic circuit development.

Featuring a single internally compensated operational amplifier in a standard 8-pin DIP package, the LM741 is widely used in educational electronics, analog circuit experiments, and traditional amplifier designs.

Its through-hole package makes it suitable for breadboards, PCB prototyping, and electronics laboratory applications.

Key Features

  • Single general-purpose operational amplifier
  • High open-loop voltage gain
  • Differential input and single-ended output
  • Internally frequency compensated
  • Supports dual power supply operation
  • Input offset voltage adjustment capability
  • Short-circuit protection, subject to operating limits
  • Standard DIP-8 through-hole package
  • Suitable for analog signal processing
  • Ideal for electronics education and prototyping

Technical Specifications

Parameter Specification
Model LM741
Component Type Operational Amplifier IC
Number of Amplifiers 1
Architecture Bipolar
Package DIP-8
Supply Voltage Typically ±5V to ±15V
Typical Operating Supply ±15V DC
Gain Bandwidth Product Approximately 1MHz
Slew Rate Approximately 0.5V/µs
Input Offset Voltage Typically 1–5mV, Manufacturer Dependent
Input Bias Current Typically 80nA
Open-Loop Voltage Gain Approximately 200,000 V/V Typical
Output Type Analog
Frequency Compensation Internal
Offset Adjustment Supported
Mounting Type Through-Hole
Number of Pins 8

Note: Specifications vary by manufacturer and LM741 variant. Consult the datasheet for the exact electrical limits.

Pin Configuration

Pin Function
1 Offset Null
2 Inverting Input (−)
3 Non-Inverting Input (+)
4 Negative Supply (V−)
5 Offset Null
6 Output
7 Positive Supply (V+)
8 Not Connected (NC)

How It Works

The LM741 amplifies the voltage difference between its two input terminals.

  • Non-Inverting Input (+): A positive difference relative to the inverting input tends to drive the output positive.
  • Inverting Input (−): A positive difference relative to the non-inverting input tends to drive the output negative.
  • Output: Provides the amplified analog signal within the circuit's operating limits.

External feedback resistors are commonly used to set the amplifier's closed-loop gain and control its operation.

Common Circuit Configurations

Inverting Amplifier

Amplifies an input signal with inverted polarity.

Non-Inverting Amplifier

Amplifies an input signal while maintaining its polarity.

Voltage Follower

Provides approximately unity voltage gain for buffering signals, provided the input and output voltage ranges are respected.

Active Filter

Can be combined with resistors and capacitors to build low-frequency analog filters.

Summing Amplifier

Combines multiple analog input signals using a suitable resistor network.

Applications

  • Analog Signal Amplification
  • Educational Electronics
  • Active Filter Circuits
  • Signal Conditioning
  • Analog Circuit Experiments
  • Voltage Amplification
  • Summing Amplifiers
  • Electronic Prototyping
  • Laboratory Training
  • Traditional Analog Circuit Designs

Important Notes

  • The LM741 is a single operational amplifier, not a dual or quad amplifier.
  • It is generally intended for dual-supply analog circuits.
  • It is not suitable for typical 3.3V or 5V single-supply microcontroller applications.
  • The LM741 is not a rail-to-rail operational amplifier.
  • Its input common-mode voltage range and output voltage swing require headroom from the supply rails.
  • It is not intended for direct motor, relay, or high-current load driving.
  • Although it can be used for basic voltage comparison, a dedicated comparator is preferable for switching applications.
  • Use suitable power supply bypass capacitors near the IC.
  • Do not exceed the manufacturer's absolute maximum voltage or current ratings.
  • For modern low-voltage circuits, consider an LM358 or another suitable low-voltage operational amplifier.

Package Includes

1 × LM741 Operational Amplifier IC – DIP-8