Robot Pi Shop

Long Distance 2.7G Microwave Detection

$1.99

Shipping calculated at checkout.

Quantity

RCWL-0515 2.7GHz Microwave Radar Motion Sensor Module – Long-Range Motion Detection

The RCWL-0515 Microwave Radar Motion Sensor Module is a compact, non-contact motion detection module that uses 2.7GHz Doppler radar technology to detect movement within its sensing area.

Unlike conventional infrared motion sensors, the RCWL-0515 detects movement using microwave signals, allowing it to operate in various lighting conditions, including complete darkness.

Featuring a wide detection angle, low power consumption, and a typical detection range of up to 12 meters, the module is suitable for automatic lighting, security systems, smart home automation, and electronic motion detection projects.

Its compact PCB design makes it easy to integrate into Arduino, ESP32, and other microcontroller-based applications using a suitable electrical interface.

Key Features

  • Model: RCWL-0515
  • Sensor Type: Microwave Doppler Radar Motion Sensor
  • Operating Frequency: Approximately 2.7GHz
  • Operating Voltage: 4–18V DC
  • Typical Operating Current: Approximately 4mA
  • Detection Range: Up to 12m under suitable conditions
  • Non-Contact Motion Detection
  • Wide Detection Angle
  • Works in Darkness and Different Lighting Conditions
  • Can Detect Movement Through Some Non-Metallic Materials
  • Compact PCB Design
  • Adjustable Detection Distance on Supported Configurations
  • Adjustable Trigger Timing on Supported Configurations
  • Suitable for Automation and Security Projects

Technical Specifications

Parameter Specification
Model RCWL-0515
Product Type Microwave Motion Detection Module
Detection Technology Doppler Radar
Operating Frequency Approximately 2.7GHz
Supply Voltage 4–18V DC
Typical Operating Current Approximately 4mA
Detection Range Up to 12m, Environment Dependent
Detection Method Movement Detection
Detection Angle Wide-Angle
Output Type Motion Detection Signal
Detection Distance Adjustment Supported by Certain PCB Configurations
Trigger Time Adjustment Supported by Certain PCB Configurations
Antenna Integrated PCB Antenna
Mounting Type PCB Module
Operating Temperature Manufacturer Specification Required
Dimensions Verify Supplied PCB Revision

Note: The specifications above are based on the supplied product listing. Actual sensing range, output characteristics, and adjustment options depend on the hardware revision and installation environment.

How It Works

The RCWL-0515 uses Doppler radar technology to detect moving objects.

The module transmits a microwave signal and monitors changes in the reflected signal caused by movement.

When motion is detected, the module generates an electrical output signal that can be used by a compatible control circuit.

Advantages of Microwave Motion Detection

  • Works in both bright and dark environments
  • Does not require visible light
  • Can detect movement without physical contact
  • Offers wide-area sensing
  • Can detect movement through certain thin, non-metallic materials
  • Suitable for concealed installations in compatible enclosures

Unlike a PIR sensor, microwave radar detects motion through changes in reflected radio signals rather than changes in infrared radiation.

Detection Range

The module is listed with a typical maximum detection range of approximately 12 meters.

Actual performance depends on:

  • Object size and movement speed
  • Installation position
  • Nearby metal surfaces
  • Wall and enclosure materials
  • Environmental interference
  • Radar orientation
  • Hardware configuration

The stated range is not guaranteed in every installation.

Arduino and ESP32 Compatibility

The RCWL-0515 can be integrated with Arduino, ESP32, and other microcontrollers for motion detection applications.

General Connection Requirements

  • Provide a regulated supply within the specified 4–18V range.
  • Connect the module ground to the controller ground when using a non-isolated interface.
  • Connect the motion output to a compatible digital input.
  • Verify the module's actual output voltage and pinout before wiring.

Important: The exact signal pin configuration and output voltage must be confirmed for the supplied RCWL-0515 board. Do not assume the output is directly compatible with 3.3V ESP32 GPIO pins without checking.

Applications

  • Automatic Lighting Systems
  • Motion-Activated LED Lighting
  • Smart Home Automation
  • Security Alarm Systems
  • Motion Detection Projects
  • Industrial Automation
  • Automatic Door Applications
  • Arduino and ESP32 Projects
  • Robotics
  • Occupancy-Triggered Devices
  • DIY Electronics
  • Educational Radar Experiments

Important Notes

  • The RCWL-0515 is a motion detection sensor, not a distance measurement sensor.
  • It does not provide the exact distance or position of an object.
  • The stated detection range is up to 12m under suitable conditions.
  • The sensor detects movement and should not be assumed to provide reliable stationary human presence detection.
  • Detection through walls and other materials depends on their composition and thickness.
  • Metal surfaces can reflect or block microwave signals and affect detection performance.
  • Nearby moving objects may cause unwanted triggering.
  • The module is not a certified safety or security detection device.
  • The operating frequency and radio emissions should comply with applicable local regulations.
  • Verify the PCB pinout, output voltage, and adjustment points before installation.

Package Includes

1 × RCWL-0515 2.7GHz Microwave Radar Motion Sensor Module