MG995 180° High-Torque Metal Gear Servo Motor – Arduino Compatible
The MG995 is a high-torque metal gear servo motor designed for robotics, RC vehicles, mechanical positioning, and automation projects. Featuring a durable metal gear transmission and standard PWM servo control, it provides controlled angular movement for applications requiring mechanical strength and reliable positioning.
With a listed stall torque of 10kg·cm at 4.8V and 12kg·cm at 6V, the MG995 is suitable for robotic arms, grippers, steering mechanisms, and Arduino-compatible projects.
The servo operates from 4.8V to 7.2V and supports approximately 180° of angular movement, depending on the specific version and control pulse limits. Its standard 3-wire interface allows integration with Arduino, ESP32, Raspberry Pi, and compatible servo controllers.
Key Features
-
High-Torque Servo Motor: Listed stall torque of 12kg·cm at 6V.
-
Metal Gear Transmission: Provides durability for mechanically demanding applications.
-
180° Position Control: Supports controlled angular positioning.
-
PWM Servo Interface: Compatible with standard hobby servo control signals.
-
Wide Operating Voltage: Listed operating range of 4.8V to 7.2V DC.
-
Fast Response: Listed no-load speed of 0.16sec/60° at 6V.
-
Standard 3-Wire Connector: Compatible with common JR/Futaba-style servo connections.
-
Arduino Compatible: Can be controlled using the Arduino Servo library.
-
Compact Standard-Size Design: Suitable for robotic mechanisms and RC applications.
-
Integrated Position Feedback: Internal feedback system maintains the commanded servo position.
Technical Specifications
| Parameter |
Specification |
| Model |
MG995 |
| Product Type |
High-Torque Servo Motor |
| Control Type |
Positional Servo |
| Gear Material |
Metal |
| Operating Voltage |
4.8V–7.2V DC (listed) |
| Stall Torque at 4.8V |
10kg·cm |
| Stall Torque at 6V |
12kg·cm |
| No-Load Speed at 4.8V |
0.20sec/60° |
| No-Load Speed at 6V |
0.16sec/60° |
| Rotation Range |
Approximately 180° |
| Control Interface |
PWM Servo Signal |
| Typical Control Frequency |
50Hz |
| Typical Neutral Pulse |
1500µs |
| Dimensions |
40.7 × 19.7 × 42.9mm |
| Connector Type |
3-Pin JR/Futaba-Compatible |
| Position Feedback |
Internal |
| Rotation Type |
Limited-Angle Positioning |
| Stall Current |
Not confirmed |
| Weight |
Not confirmed |
Note: Specifications are based on the supplied product information. Actual performance may vary depending on manufacturer, operating voltage, mechanical load, and servo version.
Wire Configuration
| Wire Color |
Function |
Connection |
| Red |
Positive Power |
Regulated Servo Power Supply |
| Brown |
Ground |
GND |
| Orange |
PWM Control Signal |
Microcontroller Signal Pin |
Arduino UNO Connection Example
| MG995 Servo |
Arduino UNO |
| Red Wire |
External Regulated 5V–6V Supply |
| Brown Wire |
External Supply GND |
| Orange Wire |
Digital Pin D9 |
| External Supply GND |
Arduino GND |
Connection Instructions:
- Connect the servo's red wire to a suitable regulated external power supply.
- Connect the brown wire to the external power supply ground.
- Connect the orange signal wire to Arduino digital pin D9.
- Connect Arduino GND to the external power supply ground.
- Use the Arduino Servo library to generate the required control signals.
- Test the servo with a limited movement range before using the full mechanical travel.
Important: Do not power the MG995 directly from an Arduino GPIO pin. Use an external supply capable of handling the servo's startup and peak current.
Arduino Example Code
#include <Servo.h>
Servo myServo;
void setup() {
myServo.attach(9);
myServo.write(90);
delay(1000);
}
void loop() {
myServo.write(45);
delay(1000);
myServo.write(90);
delay(1000);
myServo.write(135);
delay(1000);
}
This example moves the servo between three commanded positions.
Note: Actual angular movement depends on the servo's pulse-width limits and mechanical configuration. Avoid commanding positions beyond its supported travel.
Applications
- Robotic arms and grippers
- Arduino robotics projects
- RC cars and steering mechanisms
- RC airplanes and boats
- Robotic joints and mechanical linkages
- Pan-and-tilt systems
- Automated positioning mechanisms
- Educational robotics
- DIY automation projects
- Embedded motion control
- Mechanical engineering prototypes
- Servo-controlled devices
Important Notes
- The MG995 is a positional servo motor, not a continuous rotation servo.
- The nominal 180° rotation range depends on the servo version and supported control pulse widths.
- The listed torque values represent stall torque, not continuous operating torque.
- Use a regulated external power supply with sufficient current capacity.
- The servo and microcontroller must share a common ground.
- Avoid operating the servo continuously under stall conditions, as this may cause overheating or gear damage.
- The actual servo speed depends on voltage, load, and operating conditions.
- Do not force the output shaft beyond its mechanical limits.
- The servo uses internal position feedback but does not provide a separate position feedback output.
- The MG995 is not waterproof or dustproof unless explicitly certified by the manufacturer.
- For ESP32 and Raspberry Pi applications, use an appropriate PWM signal or dedicated servo controller.
- Verify the mechanical dimensions and servo horn compatibility before installation.
- The MG995 is commonly available from multiple manufacturers, so specifications may vary between versions.
Package Includes