Robot Pi Shop

NE555P - Timer DIP-8

$0.25

Shipping calculated at checkout.

Quantity

The NE555P Timer IC is a versatile and widely used integrated circuit designed for generating accurate time delays, pulses, and oscillating signals. Housed in an 8-pin DIP (DIP-8) package, this timer IC is ideal for electronic circuits, DIY projects, educational applications, and industrial control systems.

The NE555P supports monostable (one-shot), astable (oscillator), and bistable (flip-flop) operating modes, making it suitable for applications such as LED flashing circuits, pulse generators, timing controllers, and alarm systems.

With a wide operating voltage range of 4.5V to 16V, the NE555P can be easily integrated into a variety of analog and digital electronic projects.

Key Features

  • Precision timer IC for timing and pulse generation
  • Supports monostable, astable, and bistable operating modes
  • Wide operating voltage range from 4.5V to 16V
  • Adjustable timing using external resistors and capacitors
  • Suitable for pulse generation and oscillator circuits
  • Can generate square-wave signals with adjustable frequency and duty cycle
  • TTL-compatible output when operated at suitable supply voltages
  • 8-pin DIP package for breadboard and PCB installation
  • Compatible with Arduino-based projects as an external timing circuit
  • Suitable for electronics education and prototyping

Technical Specifications

Parameter Specification
Model NE555P
Component Type Timer IC
Operating Voltage 4.5V – 16V DC
Minimum Operating Temperature 0°C
Maximum Operating Temperature +70°C
Package PDIP-8 / DIP-8
Number of Pins 8
Mounting Type Through-Hole
Operating Modes Astable, Monostable, Bistable
Timing Adjustment External Resistors and Capacitors
Output Type Digital Pulse / Square Wave

Pin Configuration

Pin Name Function
1 GND Ground connection
2 TRIG Trigger input
3 OUT Timer output
4 RESET Active-low reset input
5 CTRL Control voltage input
6 THRES Threshold input
7 DISCH Discharge terminal
8 VCC Positive power supply

Operating Modes

1. Astable Mode (Oscillator)

The NE555P continuously generates a repeating pulse or square-wave signal without requiring an external trigger.

Typical applications:

  • LED flashers
  • Clock signal generators
  • Tone generators
  • Pulse-width modulation experiments

2. Monostable Mode (One-Shot Timer)

The IC generates a single output pulse when triggered. The pulse duration is determined by an external resistor and capacitor.

Typical applications:

  • Time-delay circuits
  • Push-button timers
  • Pulse generators
  • Triggered switching circuits

3. Bistable Mode (Flip-Flop)

The timer can operate as a simple two-state latch, switching between HIGH and LOW output states using external trigger and reset signals.

Typical applications:

  • Electronic switches
  • Toggle circuits
  • Control logic experiments

Basic Timing Formulas

Monostable Mode:

Pulse Duration:

T ≈ 1.1 × R × C

Astable Mode:

Oscillation Frequency:

f ≈ 1.44 / ((R1 + 2 × R2) × C)

Where:

  • R, R1, R2 = Resistance in ohms (Ω)
  • C = Capacitance in farads (F)
  • T = Time in seconds
  • f = Frequency in hertz (Hz)

Applications

  • LED flashing circuits
  • Electronic timers
  • Pulse generators
  • PWM signal generation
  • Alarm and buzzer circuits
  • Time-delay relays
  • Oscillator circuits
  • Educational electronics projects
  • DIY automation systems
  • Breadboard prototyping

Important Notes

  • The NE555P is a timer IC, not a microcontroller.
  • External resistors and capacitors are required for most timing applications.
  • Timing accuracy depends on the tolerance and stability of external components.
  • Ensure the supply voltage remains within the specified operating range.
  • A decoupling capacitor near the power supply pins is recommended.
  • Use an external transistor or driver when controlling loads that exceed the IC's output current capability.
  • Check the manufacturer's datasheet for maximum output current and other electrical limits.

Package Includes

  • 1 × NE555P Timer IC (DIP-8)