Robot Pi Shop

Nema 17 Stepper Motor 17HD48002-22B

$24.99

Shipping calculated at checkout.

Quantity

The NEMA 17 17HD48002-22B Stepper Motor is a high-torque stepper motor designed for precision motion control in robotics, CNC machines, 3D printers, automation systems, and DIY electronics projects.

Originally described as an OpenBuilds custom NEMA 17 stepper motor, this model features a rated current of 1.7A per phase, a 3V rated winding voltage, and a 19W rated power specification.

Its standard NEMA 17 mounting frame makes it suitable for integration into compatible mechanical assemblies, while its stepper motor design enables controlled positioning, rotation, and holding operations.

The motor requires a compatible constant-current stepper motor driver and can be controlled using Arduino, ESP32, Raspberry Pi, and other microcontrollers through an appropriate driver interface.

Key Features

  • NEMA 17 Frame: Standard stepper motor mounting format for compatible mechanical assemblies.
  • High-Torque Design: Suitable for applications requiring controlled movement and holding force.
  • 1.7A Rated Current: Designed for operation with a suitable current-limited stepper driver.
  • 3V Rated Winding Voltage: Low-voltage motor winding specification.
  • Precision Motion Control: Enables repeatable positioning using step-based control.
  • Bidirectional Rotation: Supports clockwise and counterclockwise movement.
  • Microstepping Support: Compatible with microstepping operation when using a suitable driver.
  • Compact Construction: Suitable for robotics, automation, and mechanical positioning systems.

Technical Specifications

Parameter Specification
Model 17HD48002-22B
Motor Type Stepper Motor
Frame Size NEMA 17
Rated Voltage 3V
Rated Current 1.7A
Rated Power 19W (as listed)
Rated Speed 200 RPM (as listed)
Mounting Frame Approximately 42 × 42 mm
Shaft Type Single Shaft
Control Method Constant-Current Stepper Driver
Rotation Direction Bidirectional
Microstepping Driver Dependent

Note: Holding torque, step angle, shaft diameter, motor body length, winding resistance, and winding configuration require confirmation from the manufacturer's datasheet.

Compatible Stepper Motor Drivers

The motor must be operated using a suitable current-limited stepper motor driver.

Potential driver options include:

  • DRV8825 Stepper Motor Driver: Supports adjustable current limiting and microstepping.
  • TMC2209 Stepper Motor Driver: Suitable for smooth and quieter stepper motor control.
  • TB6600 Stepper Motor Driver: Suitable for external stepper control where current settings and motor wiring are compatible.
  • A4988 Stepper Motor Driver: May be used if the required current can be supported within the driver's cooling and operating limits.

Driver compatibility depends on the motor winding configuration, rated current, and thermal requirements.

Connection Example – Arduino with DRV8825

For a confirmed four-wire bipolar version:

DRV8825 Pin Connection
STEP Arduino digital output
DIR Arduino digital output
EN Arduino digital output or GND
VDD Arduino 5V
GND (Logic) Arduino GND
VMOT External motor power supply
GND (Motor Supply) Power supply negative
A1 / A2 Motor winding A
B1 / B2 Motor winding B

Before connecting, identify the motor winding pairs and configure the driver's current limit according to the motor specifications.

Applications

  • CNC machines and routers
  • 3D printers
  • OpenBuilds motion systems
  • Robotics and robotic arms
  • Linear positioning systems
  • XY plotters
  • Camera sliders
  • Automated mechanical systems
  • DIY motion control projects
  • Educational robotics

Important Notes

  • Do not connect this motor directly to a power supply. A compatible constant-current or chopper stepper motor driver is required.
  • The 3V rating refers to the motor winding specification. It does not necessarily represent the external supply voltage required by the stepper driver.
  • Set the driver's current limit according to the motor's rated phase current.
  • Never connect or disconnect the motor while the driver is powered.
  • The motor may become hot during continuous operation or while holding position.
  • Actual operating torque decreases as rotational speed increases.
  • Confirm the shaft diameter before selecting mechanical couplings or pulleys.
  • Verify the motor wiring and step angle before installation.

Package Includes

  • 1 × NEMA 17 17HD48002-22B Stepper Motor