Robot Pi Shop

Nema 17 Stepper Motor 42HS34

$12.99

Shipping calculated at checkout.

Quantity

The NEMA 17 42HS34 Stepper Motor is a compact, high-precision bipolar stepper motor designed for robotics, CNC machines, 3D printers, automation systems, and DIY electronics projects.

Featuring a 1.8° step angle, 1.5A rated current per phase, and 0.25 N·m holding torque, this motor provides accurate positioning and repeatable rotational movement.

Its standard NEMA 17 mounting frame and 5 mm shaft diameter make it suitable for integration into mechanical assemblies, motion control systems, and educational robotics projects.

The motor can be controlled using Arduino, ESP32, Raspberry Pi, and other microcontrollers through a compatible stepper motor driver.

Key Features

  • Precise Motion Control: 1.8° step angle provides 200 full steps per revolution.
  • Holding Torque: 0.25 N·m (approximately 2.55 kg·cm).
  • Rated Current: 1.5A per phase.
  • Standard NEMA 17 Frame: Suitable for common mounting brackets and mechanical assemblies.
  • 5 mm Shaft: Compatible with appropriately sized shaft couplers, pulleys, and gears.
  • Bipolar Stepper Motor: Designed for use with compatible bipolar stepper drivers.
  • Microstepping Support: Enables smoother rotation and finer positioning when paired with a suitable driver.
  • Bidirectional Operation: Supports clockwise and counterclockwise rotation.
  • Compact Design: Suitable for robotics and space-constrained automation projects.

Technical Specifications

Parameter Specification
Model 42HS34
Motor Type Bipolar Stepper Motor
Frame Size NEMA 17
Step Angle 1.8°
Steps per Revolution 200
Rated Current 1.5A per phase
Holding Torque 0.25 N·m
Holding Torque Approx. 2.55 kg·cm
Shaft Diameter 5 mm
Phase Inductance 2.5 ± 20% mH
Insulation Resistance ≥100 MΩ at 500V DC
Control Method Constant-Current Stepper Driver
Rotation Direction Clockwise / Counterclockwise

Compatible Stepper Motor Drivers

The NEMA 17 42HS34 can be operated using a compatible bipolar stepper motor driver, including:

  • A4988: Adjustable current limiting and microstepping. Adequate cooling may be necessary at higher currents.
  • DRV8825: Supports adjustable current limiting and microstepping.
  • TMC2209: Suitable for smoother and quieter motor operation.
  • TB6600: External stepper driver suitable for CNC and automation applications.

Important: Select a driver capable of supplying the required phase current and configure its current limit according to the motor specifications.

Connection Example – Arduino with DRV8825

DRV8825 Pin Connection
VDD Arduino 5V
GND (Logic) Arduino GND
STEP Arduino Digital Pin 3
DIR Arduino Digital Pin 2
VMOT External Motor Power Supply
GND (Motor) External Supply Negative
A1 / A2 Motor Winding A
B1 / B2 Motor Winding B

Identify the motor winding pairs before connecting them to the driver. Configure the driver's enable, sleep, reset, and microstepping connections according to its documentation.

Applications

  • 3D printers
  • CNC routers and engraving machines
  • Robotics and robotic arms
  • XY plotters
  • Automated positioning systems
  • Camera sliders and rotating platforms
  • Linear motion mechanisms
  • Industrial automation prototypes
  • Educational robotics projects
  • Arduino and ESP32 motion control systems

Important Notes

  • A stepper motor driver is required. Do not connect the motor directly to a DC power supply or microcontroller GPIO pins.
  • The rated phase current is 1.5A. Configure the driver current limit correctly to avoid overheating.
  • Use an external motor power supply compatible with the selected driver.
  • Motor torque decreases as rotational speed increases.
  • Verify the motor's physical dimensions, shaft length, and mounting requirements before installation.
  • Do not connect or disconnect the motor while the driver is powered.
  • Adequate driver cooling may be required during continuous operation.

Package Includes

  • 1 × NEMA 17 42HS34 Stepper Motor