Robot Pi Shop

NEO-7M GPS Module

$9.99

Shipping calculated at checkout.

Quantity

The NEO-7M GPS Module with External Ceramic Antenna is a compact satellite positioning receiver designed for GPS navigation, location tracking, robotics, drones, and embedded electronics projects.

Powered by the NEO-7M GPS chipset, the module provides positioning and navigation information, including latitude, longitude, altitude, speed, and time, through a UART serial interface.

The module features an external 12 × 12mm ceramic GPS antenna, backup battery, LED signal indicator, and configuration memory. Its compact design makes it suitable for integration with Arduino, ESP32, Raspberry Pi, and compatible flight controllers.

Key Features

  • NEO-7M GPS Chipset: Provides satellite-based positioning and navigation data.
  • External Ceramic GPS Antenna: Includes a 12 × 12mm antenna for improved satellite signal reception.
  • UART TTL Communication: Allows serial communication with microcontrollers and embedded systems.
  • Default Baud Rate: 9600 bps.
  • Backup Battery: Helps retain receiver backup data for faster satellite reacquisition when adequately charged.
  • Configuration Storage: Supports saving receiver configuration parameters using onboard nonvolatile memory, where fitted.
  • LED Status Indicator: Provides visual indication of GPS module operation.
  • Compact PCB Design: Suitable for space-constrained electronics projects.
  • Flight Controller Compatibility: Can be integrated with compatible MultiWii and APM2.5 flight controller systems.
  • Low-Power GPS Receiver: Suitable for portable positioning and tracking applications.

Technical Specifications

Parameter Specification
Product Type GPS Receiver Module
GPS Chipset u-blox NEO-7M
Satellite Navigation GPS
Communication Interface UART TTL
Default Baud Rate 9600 bps
Module Supply Voltage 3–5V DC (supplier-listed)
GPS Chip Operating Voltage 1.65–3.6V DC, depending on supply configuration
Antenna Type External Ceramic GPS Antenna
Antenna Dimensions 12 × 12 mm
Module Dimensions 23 × 30 mm
Mounting Hole Diameter 3 mm
Backup Battery Onboard
Status Indicator LED
Configuration Storage Onboard memory, module-dependent
GPS Data Output Position, altitude, speed, time and satellite information
Data Protocol NMEA / UBX
Default Serial Speed 9600 bps

Pin Configuration

Typical NEO-7M breakout connections:

Pin Function Description
VCC Power Input Supplies power to the GPS module
GND Ground Common ground connection
TX UART Transmit Sends GPS data to the microcontroller
RX UART Receive Receives configuration commands

Note: Verify the pin labels on the supplied module before connecting it. The GPS chipset uses low-voltage logic, and its RX pin must not be exposed directly to 5V signals unless the breakout includes suitable level shifting.

Connection Example – Arduino UNO

NEO-7M GPS Arduino UNO
VCC 5V, if supported by the breakout board
GND GND
TX D4 (SoftwareSerial RX)
RX D3 (SoftwareSerial TX through level shifting)

The module can be used with the Arduino IDE and GPS libraries such as TinyGPSPlus to read positioning data.

Connection Example – ESP32

NEO-7M GPS ESP32
VCC 3.3V, if supported by the breakout board
GND GND
TX GPIO16 (UART RX)
RX GPIO17 (UART TX)

The ESP32 can receive GPS data through a hardware UART and process it for navigation, tracking, and IoT applications.

Connection Example – Raspberry Pi

NEO-7M GPS Raspberry Pi
VCC Compatible regulated supply
GND GND
TX GPIO15 (UART RX)
RX GPIO14 (UART TX)

GPS data can be processed using Python and serial communication libraries.

Applications

  • GPS location tracking systems
  • Arduino and ESP32 GPS projects
  • Raspberry Pi navigation systems
  • Robotics and autonomous vehicles
  • Drones and UAV navigation
  • GPS data logging
  • Vehicle tracking projects
  • Portable positioning devices
  • Outdoor navigation systems
  • Educational GPS projects
  • Compatible APM and MultiWii flight controller applications

Important Notes

  • The NEO-7M is a GPS receiver, not a cellular or Wi-Fi tracking device. Remote location reporting requires an additional communication module.
  • The GPS antenna should have a clear view of the sky for reliable satellite reception.
  • Indoor operation may result in weak satellite signals or failure to obtain a position fix.
  • Initial satellite acquisition may take longer after first installation or extended periods without power.
  • The onboard backup battery is intended for GPS backup functions, not for powering the module during normal operation.
  • Verify the breakout board's power regulation and UART logic levels before connecting it to 5V microcontrollers.
  • APM2.5 and MultiWii compatibility depends on the controller's firmware, connectors, and communication settings.
  • Position accuracy depends on satellite visibility and environmental conditions.

Package Includes

  • 1 × NEO-7M GPS Receiver Module
  • 1 × External 12 × 12mm Ceramic GPS Antenna