The NEO-M8N GPS/GNSS Module with Active Ceramic Antenna is a satellite positioning receiver designed for navigation, location tracking, robotics, drones, and embedded electronics projects.
Powered by the NEO-M8N GNSS chipset, the module supports multiple satellite navigation systems, including GPS, GLONASS, Galileo, and BeiDou, depending on the configured operating mode.
The module features an external 25 × 25mm active ceramic antenna, a compact receiver board, and a backup battery for retaining satellite information. Its high-sensitivity receiver and multi-GNSS capabilities make it suitable for applications requiring reliable positioning and navigation.
It can be integrated with Arduino, ESP32, Raspberry Pi, and compatible flight controllers through serial communication.
Key Features
-
NEO-M8N GNSS Chipset: High-performance satellite positioning receiver.
-
Multi-GNSS Support: Supports GPS, GLONASS, Galileo, and BeiDou, depending on configuration.
-
Active Ceramic Antenna: External antenna improves satellite signal reception.
-
High Positioning Accuracy: Approximately 2.5m horizontal positioning accuracy under suitable conditions.
-
Fast Position Updates: Supports configurable navigation update rates.
-
UART Serial Communication: Compatible with microcontrollers and embedded systems.
-
Backup Battery: Helps retain satellite data and receiver settings for faster reacquisition.
-
Anti-Jamming Technology: Supports interference detection and mitigation features.
-
Compact Design: Suitable for portable navigation systems, drones, and robotics.
-
Flight Controller Integration: Can be used with compatible autopilot systems.
Technical Specifications
| Parameter |
Specification |
| Product Type |
GPS/GNSS Receiver Module |
| GNSS Chipset |
NEO-M8N |
| Supported GNSS |
GPS, GLONASS, Galileo, BeiDou |
| Receiver Channels |
72 |
| Horizontal Position Accuracy |
Approximately 2.5m |
| GNSS Chip Supply Voltage |
2.7–3.6V DC |
| Operating Current |
Approximately 67mA (supplier-listed) |
| Operating Temperature |
-40°C to +85°C (receiver specification) |
| Receiver Dimensions |
36 × 26 × 4.5 mm (supplier-listed) |
| Communication Interface |
UART |
| Data Protocol |
NMEA / UBX |
| Backup Battery |
Onboard |
| Antenna Type |
External Active Ceramic Antenna |
| Antenna Dimensions |
25.5 × 25 × 8.5 mm |
| Antenna Cable Length |
20mm |
| Anti-Jamming |
Interference detection and mitigation support |
Pin Configuration
Typical NEO-M8N UART connections:
| Pin |
Function |
Description |
| VCC |
Power Input |
Supplies regulated power to the receiver |
| GND |
Ground |
Common ground connection |
| TX |
UART Transmit |
Sends GNSS data to the microcontroller |
| RX |
UART Receive |
Receives configuration commands |
Important: The NEO-M8N chip operates at low voltage. The correct module input voltage depends on whether the breakout board includes an onboard regulator.
Connection Example – Arduino UNO
| NEO-M8N |
Arduino UNO |
| VCC |
Compatible regulated power supply |
| GND |
GND |
| TX |
D4 (SoftwareSerial RX) |
| RX |
D3 (SoftwareSerial TX through level shifting) |
The module can communicate with Arduino through a serial interface. GPS data can be decoded using libraries such as TinyGPSPlus.
Connection Example – ESP32
| NEO-M8N |
ESP32 |
| VCC |
Compatible regulated power supply |
| GND |
GND |
| TX |
GPIO16 (UART RX) |
| RX |
GPIO17 (UART TX) |
The ESP32 can read latitude, longitude, altitude, speed, and satellite information using its hardware UART interface.
Connection Example – Raspberry Pi
| NEO-M8N |
Raspberry Pi |
| VCC |
Compatible regulated power supply |
| GND |
GND |
| TX |
GPIO15 (UART RX) |
| RX |
GPIO14 (UART TX) |
GNSS data can be processed using Python serial communication libraries.
Applications
- GPS/GNSS location tracking
- Robotics and autonomous vehicles
- Drone and UAV navigation
- Arduino and ESP32 positioning projects
- Raspberry Pi navigation systems
- GPS data logging
- Outdoor positioning equipment
- Vehicle tracking systems
- Agricultural robotics
- Autonomous mobile robots
- Educational satellite navigation projects
- Compatible flight controller applications
Important Notes
-
The NEO-M8N is a GNSS receiver, not a cellular or Wi-Fi tracking device. Remote tracking requires an additional communication module.
- A clear view of the sky is recommended for reliable satellite reception.
- Indoor operation may result in poor reception or failure to obtain a position fix.
- The receiver supports multiple GNSS systems, but not all systems can necessarily operate simultaneously.
- Position accuracy depends on satellite visibility, environmental conditions, antenna placement, and receiver configuration.
- The backup battery is intended for receiver backup functions, not continuous module operation.
- Confirm the breakout board's input voltage and UART logic levels before connecting it to a microcontroller.
- Verify connector pin assignments before wiring.
- Flight controller compatibility depends on the controller's firmware, connector, and communication configuration.
Package Includes
- 1 × NEO-M8N GPS/GNSS Receiver Module
- 1 × External Active Ceramic GPS Antenna with Cable