The NFC 13.56MHz RFID Card is a contactless smart card designed for RFID identification, access control, authentication, and electronic projects.
Operating at 13.56MHz, this card uses RFID technology to communicate wirelessly with compatible card readers. It is suitable for applications such as door access systems, attendance tracking, identification systems, and Arduino or ESP32-based RFID projects.
The card features a compact, lightweight design with a plain white surface, making it suitable for everyday use and integration into custom identification systems.
Key Features
-
13.56MHz Operating Frequency: Supports contactless RFID communication.
-
Contactless Operation: Communicates with compatible RFID readers without physical electrical contact.
-
MIFARE Classic 1K Compatibility: Based on the listed MF1ICS50 chip specification.
-
106 kbit/s Data Transfer Rate: Supports standard RFID communication.
-
Data Integrity Protection: Uses CRC, parity checking, bit coding, and bit counting.
-
Reusable RFID Card: Suitable for repeated reading and supported memory operations.
-
Compact Card Design: Convenient for identification and access applications.
-
Microcontroller Integration: Can be used with compatible RFID readers connected to Arduino, ESP32, and Raspberry Pi.
Technical Specifications
| Parameter |
Specification |
| Product Type |
Contactless RFID Smart Card |
| Operating Frequency |
13.56MHz |
| Listed RFID Chip |
MF1ICS50 |
| Card Technology |
MIFARE Classic 1K |
| Communication Standard |
ISO/IEC 14443 Type A |
| Data Transfer Rate |
106 kbit/s |
| Memory Capacity |
1KB EEPROM |
| Memory Organization |
16 sectors × 4 blocks |
| Block Size |
16 bytes |
| Data Integrity |
16-bit CRC, parity, bit coding, bit counting |
| Communication Type |
Contactless RFID |
| Card Color |
White |
| Power Supply |
Passive – powered by the RFID reader's electromagnetic field |
| Typical Reading Distance |
Depends on the reader, antenna, and environment |
The chip model and associated memory specifications are based on the original product listing and should be verified against the actual card.
Compatible RFID Readers
The card can be used with compatible 13.56MHz RFID reader modules, including:
-
MFRC522 RFID Reader Module: Commonly used with Arduino and ESP32 projects.
-
PN532 NFC/RFID Reader Module: Supports MIFARE Classic cards when configured with compatible software.
-
Compatible 13.56MHz Access Control Readers: Readers supporting MIFARE Classic technology.
Note: Not all 13.56MHz NFC readers support MIFARE Classic authentication and memory operations.
Connection Example with Arduino
The NFC card does not require wiring. It communicates wirelessly with an RFID reader connected to a microcontroller.
Example MFRC522 to Arduino Uno SPI connection:
| MFRC522 Pin |
Arduino Uno Pin |
| SDA / SS |
D10 |
| SCK |
D13 |
| MOSI |
D11 |
| MISO |
D12 |
| RST |
D9 |
| GND |
GND |
| 3.3V |
3.3V |
Use an appropriate MFRC522 library to read the card UID and access supported memory blocks.
Applications
- RFID door access control systems
- Employee attendance systems
- Student identification projects
- RFID-based authentication
- Smart locker systems
- Arduino and ESP32 RFID projects
- Electronic identification systems
- Educational RFID and NFC experiments
- Inventory identification projects
Important Notes
-
This is a passive RFID card, not an RFID reader or standalone electronic controller.
- A compatible 13.56MHz RFID reader is required.
- The card is not compatible with 125kHz RFID-only readers.
- MIFARE Classic support is required for authenticated memory operations.
- Compatibility with smartphones is not guaranteed, even when the phone supports NFC.
- The card UID should not be used as the sole security credential in high-security applications.
- The card is not necessarily compatible with bank payments, transport systems, or proprietary access control platforms.
- Actual communication distance depends on the reader and surrounding environment.
Package Includes