The NRF24L01+ 2.4GHz Wireless Transceiver Module is a compact, low-power wireless communication module based on the Nordic Semiconductor nRF24L01+ transceiver IC. It enables bidirectional wireless data transmission between microcontrollers, making it ideal for Arduino, ESP32, Raspberry Pi, robotics, remote control, and IoT applications.
Operating in the 2.4GHz ISM frequency band, the module supports programmable data rates of 250kbps, 1Mbps, and 2Mbps. It features automatic packet acknowledgment, retransmission, CRC error detection, and multiple data pipes for reliable wireless communication.
The module communicates through an SPI interface and operates at 3.3V, making it suitable for integration into embedded electronic projects.
3. Key Features
-
2.4GHz Wireless Communication: Operates in the worldwide 2.4GHz ISM frequency band.
-
Bidirectional Communication: Supports wireless transmission and reception.
-
Adjustable Data Rates: 250kbps, 1Mbps, and 2Mbps.
-
SPI Interface: Easy integration with compatible microcontrollers.
-
Low Power Consumption: Designed for battery-powered and portable applications.
-
Automatic Retransmission: Built-in Enhanced ShockBurst protocol improves communication reliability.
-
Automatic Acknowledgment: Confirms successful packet reception.
-
Multi-Pipe Communication: Supports up to six receive data pipes.
-
CRC Error Detection: Helps detect corrupted wireless packets.
-
Programmable RF Channels: Supports 125 RF channel settings.
-
Compact PCB Antenna: Integrated antenna eliminates the need for an external antenna.
-
Compatibility: Supports communication with compatible nRF24-series transceivers.
4. Technical Specifications
| Parameter |
Specification |
| Product Type |
Wireless RF Transceiver Module |
| RF Chip |
Nordic Semiconductor nRF24L01+ |
| Operating Frequency |
2.4GHz ISM Band |
| Frequency Range |
2.400–2.525GHz |
| Operating Voltage |
1.9–3.6V DC |
| Recommended Supply |
3.3V DC |
| Communication Interface |
SPI |
| Wireless Data Rates |
250kbps / 1Mbps / 2Mbps |
| Maximum RF Output Power |
0dBm |
| RF Output Power Settings |
0, -6, -12, -18dBm |
| Modulation |
GFSK |
| RF Channels |
125 |
| Receive Data Pipes |
Up to 6 |
| Packet Payload |
1–32 Bytes |
| Error Detection |
1- or 2-Byte CRC |
| Automatic Acknowledgment |
Supported |
| Automatic Retransmission |
Supported |
| TX Current |
Approximately 11.3mA at 0dBm |
| RX Current |
Approximately 12.3mA at 2Mbps |
| Power-Down Current |
Approximately 0.9µA |
| Standby-I Current |
Approximately 26µA |
| Antenna |
Integrated PCB Antenna |
| Logic Level |
3.3V |
Specifications are based on the standard nRF24L01+ IC. Actual module performance depends on power supply quality, PCB design, and operating conditions.
5. Pin Configuration
The NRF24L01+ module typically uses an 8-pin connector.
| Pin |
Name |
Function |
| 1 |
GND |
Ground |
| 2 |
VCC |
3.3V Power Supply |
| 3 |
CE |
Chip Enable |
| 4 |
CSN |
SPI Chip Select (Active Low) |
| 5 |
SCK |
SPI Clock |
| 6 |
MOSI |
SPI Data Input |
| 7 |
MISO |
SPI Data Output |
| 8 |
IRQ |
Interrupt Output (Active Low) |
6. Connection Example – Arduino UNO
| NRF24L01+ Pin |
Arduino UNO |
| VCC |
3.3V |
| GND |
GND |
| CE |
D9 |
| CSN |
D10 |
| SCK |
D13 |
| MOSI |
D11 |
| MISO |
D12 |
| IRQ |
Optional |
Important: Never connect the NRF24L01+ VCC pin to 5V. The module requires a 3.3V power supply.
For stable operation, a 10µF capacitor across VCC and GND near the module is recommended.
7. Compatible Development Boards
- Arduino UNO
- Arduino Nano
- Arduino Mega
- ESP32 Development Boards
- ESP8266 NodeMCU
- Raspberry Pi
- STM32 Development Boards
- Other microcontrollers with a compatible SPI interface
Note: The module uses 3.3V logic. When connecting to 5V microcontrollers, ensure the interface signals are compatible or use appropriate level shifting.
8. Applications
- Wireless robotics
- Remote-controlled vehicles
- Wireless sensor networks
- Arduino-to-Arduino communication
- ESP32 wireless projects
- Home automation
- Wireless data acquisition
- Remote monitoring systems
- IoT applications
- Battery-powered embedded systems
- Wireless controllers
- Educational electronics projects
9. Important Notes
-
Power Supply: Requires a stable 3.3V supply. Do not apply 5V to VCC.
-
Wireless Range: Depends on antenna orientation, obstacles, interference, and environmental conditions.
-
Communication Protocol: Uses Nordic's proprietary packet-based RF protocol, not WiFi or Bluetooth.
-
Library Support: Compatible with commonly used nRF24L01 software libraries, including RF24 for Arduino.
-
Power Stability: Adding a capacitor near the power pins can help prevent communication failures.
-
Module Version: This product is supplied as an nRF24L01+ module, supporting the additional 250kbps data rate compared with the original nRF24L01.
-
Regulatory Compliance: Wireless operation must comply with applicable local radio regulations.
10. Package Includes