The PC817 4-Channel Optocoupler Isolation Board is a versatile signal isolation module designed to provide electrical isolation between control circuits operating at different voltage levels.
Equipped with four independent PC817 optocoupler channels, the module allows signals from microcontrollers, PLCs, sensors, and other electronic devices to be transferred through optical coupling without a direct electrical connection between the input and output circuits.
Supporting 3.6V–24V input signals and 3.6V–30V output-side circuits, this board is suitable for Arduino, ESP32, Raspberry Pi, industrial automation, and electronic control applications.
Key Features
-
4-Channel Optocoupler Isolation: Four PC817 optocouplers for independent signal transmission.
-
Wide Input Voltage Range: Supports 3.6V–24V driving signals.
-
Flexible Output Voltage: Designed for output-side circuits operating from 3.6V to 30V.
-
Electrical Isolation: Optical signal transfer helps protect sensitive control circuits from electrical interference and ground potential differences.
-
Independent Output Channels: Allows different voltage levels to be used on separate output channels.
-
Jumper-Selectable Output Configuration: Supports configurable output behavior according to jumper settings.
-
Signal Level Conversion: Useful for interfacing control systems operating at different logic voltages.
-
Screw Terminal Connections: Convenient wiring for external circuits.
-
Compact PCB Design: Suitable for integration into electronic and industrial control systems.
Technical Specifications
| Parameter |
Specification |
| Product Type |
Optocoupler Isolation Module |
| Optocoupler IC |
PC817 |
| Number of Channels |
4 |
| Input Signal Voltage |
3.6V–24V DC |
| Output-Side Voltage Range |
3.6V–30V DC |
| Isolation Method |
Optical Coupling |
| Input Configuration |
Common Input Ground |
| Output Configuration |
Independent Channels |
| Output Type |
Phototransistor-Based |
| Output Mode |
Jumper Configurable |
| Connection Type |
Screw Terminals |
| Channel Operation |
Independent Signal Isolation |
| PCB Type |
4-Channel Isolation Board |
Connection and Pin Configuration
Input Side
| Terminal |
Description |
| IN1 |
Channel 1 Signal Input |
| IN2 |
Channel 2 Signal Input |
| IN3 |
Channel 3 Signal Input |
| IN4 |
Channel 4 Signal Input |
| GND |
Common Input Ground |
Output Side
Each channel provides an optocoupler-controlled output connection.
-
V: Output-side voltage connection.
-
G: Output-side ground or return connection.
-
Jumper: Configures the output behavior according to the board's circuit arrangement.
The output channels are independent and can be connected to circuits operating at different supported voltage levels.
Arduino Connection Example
The module can be used to isolate Arduino digital control signals from external electronic circuits.
Input Connections:
- Arduino D2 → Channel 1 Input
- Arduino D3 → Channel 2 Input
- Arduino D4 → Channel 3 Input
- Arduino D5 → Channel 4 Input
- Arduino GND → Module Input GND
Output Connections:
Connect each output channel to the appropriate external circuit using its V and G terminals.
The output circuit must include suitable current limiting or pull-up components where required.
Applications
- Arduino and ESP32 Projects
- Raspberry Pi GPIO Signal Interfacing
- PLC Signal Isolation
- Industrial Automation Systems
- Sensor Signal Isolation
- Microcontroller Protection
- Digital Signal Level Interfacing
- Noise Reduction in Control Circuits
- Robotics and Motor Control Systems
- Electronic Monitoring Equipment
Important Notes
-
Common Input Ground: All four input channels share a common GND connection.
-
Independent Outputs: Each output channel is electrically separate from the other output channels.
-
Optical Isolation: Input and output circuits are isolated through the PC817 optocouplers, provided the external wiring maintains that separation.
-
Output Operation: The V and G terminals are controlled through the optocoupler output when a valid input signal is applied.
-
Jumper Configuration: Verify the jumper position and output polarity before connecting external equipment.
-
Raspberry Pi Compatibility: The 3.3V GPIO output is below the specified 3.6V minimum input signal voltage. Direct activation from Raspberry Pi GPIO is therefore not guaranteed.
-
ESP32 Compatibility: Direct operation from 3.3V ESP32 GPIO is also not guaranteed.
-
Output Current: The module is intended for signal interfacing, not directly driving high-current loads.
-
Safety: Do not use the board for direct mains-voltage isolation without verifying the PCB's insulation and safety ratings.
Package Includes