The PIC18LF452-I/P is a high-performance, low-voltage 8-bit FLASH microcontroller from Microchip Technology, designed for embedded systems, industrial automation, robotics, and electronic control applications.
Part of the PIC18F family, this microcontroller features 32KB FLASH program memory, 1.5KB SRAM, 256 bytes of EEPROM, and a powerful RISC architecture capable of operating at clock frequencies up to 40MHz, subject to supply voltage and operating conditions.
The PIC18LF452-I/P includes a 10-bit Analog-to-Digital Converter (ADC), PWM control, hardware USART, SPI, and I2C communication interfaces, making it suitable for applications requiring sensor monitoring, motor control, data processing, and communication with external devices.
Its 40-pin PDIP package supports breadboard prototyping, through-hole PCB assembly, and educational electronics development.
Key Features
-
8-Bit PIC18 Architecture: Enhanced RISC architecture for embedded control applications.
-
32KB FLASH Program Memory: Reprogrammable memory for application firmware.
-
1.5KB SRAM: Internal data memory for program execution.
-
256 Bytes EEPROM: Non-volatile storage for configuration settings and application data.
-
Up to 40MHz Clock Frequency: High-speed operation when supported by the selected supply voltage and clock configuration.
-
10-Bit ADC: Eight analog input channels for sensor measurement and data acquisition.
-
Two CCP Modules: Support capture, compare, and PWM functions.
-
Hardware USART: Serial communication with compatible external devices.
-
SPI and I2C Interfaces: MSSP peripheral for synchronous communication.
-
Up to 34 I/O Pins: Configurable digital input/output connections.
-
Multiple Timer Modules: Supports timing, counting, and control operations.
-
Watchdog Timer: Helps improve system reliability.
-
Brown-Out Reset: Provides protection against low-voltage operating conditions.
-
In-Circuit Serial Programming (ICSP): Supports firmware programming using compatible Microchip programmers.
-
Low-Power Sleep Mode: Reduces power consumption when processing is not required.
-
Industrial Temperature Rating: Suitable for operating temperatures from -40°C to +85°C.
Technical Specifications
| Parameter |
Specification |
| Manufacturer |
Microchip Technology |
| Part Number |
PIC18LF452-I/P |
| Microcontroller Family |
PIC18 |
| Architecture |
8-Bit Enhanced RISC |
| Program Memory |
32KB FLASH |
| Program Memory Organization |
16K × 16-Bit Instructions |
| SRAM |
1,536 Bytes |
| EEPROM |
256 Bytes |
| Maximum Clock Frequency |
Up to 40MHz (Voltage Dependent) |
| Maximum Processing Speed |
Up to 10 MIPS |
| Operating Voltage |
Low-Voltage PIC18LF Series |
| GPIO Pins |
Up to 34 |
| ADC Resolution |
10-Bit |
| ADC Channels |
8 |
| CCP Modules |
2 |
| PWM Outputs |
2 CCP-Based PWM Channels |
| Timers |
Timer0, Timer1, Timer2, Timer3 |
| SPI Interface |
1 |
| I2C Interface |
1 |
| USART Interface |
1 |
| USB Interface |
Not Available |
| CAN Interface |
Not Available |
| Watchdog Timer |
Yes |
| Programming Interface |
ICSP |
| Operating Temperature |
-40°C to +85°C |
| Package |
PDIP-40 |
| Mounting Type |
Through-Hole |
| Pin Count |
40 |
Pin Configuration
| Pin |
Function |
| 1 |
MCLR / VPP – Reset and Programming Voltage |
| 2 |
RA0 / AN0 |
| 3 |
RA1 / AN1 |
| 4 |
RA2 / AN2 / VREF- |
| 5 |
RA3 / AN3 / VREF+ |
| 6 |
RA4 / T0CKI |
| 7 |
RA5 / AN4 / SS |
| 8 |
RE0 / RD / AN5 |
| 9 |
RE1 / WR / AN6 |
| 10 |
RE2 / CS / AN7 |
| 11 |
VDD – Positive Supply |
| 12 |
VSS – Ground |
| 13 |
OSC1 / CLKIN |
| 14 |
OSC2 / CLKOUT |
| 15 |
RC0 / T1OSO / T1CKI |
| 16 |
RC1 / T1OSI / CCP2 |
| 17 |
RC2 / CCP1 |
| 18 |
RC3 / SCK / SCL |
| 19 |
RD0 / PSP0 |
| 20 |
RD1 / PSP1 |
| 21 |
RD2 / PSP2 |
| 22 |
RD3 / PSP3 |
| 23 |
RC4 / SDI / SDA |
| 24 |
RC5 / SDO |
| 25 |
RC6 / TX / CK |
| 26 |
RC7 / RX / DT |
| 27 |
RD4 / PSP4 |
| 28 |
RD5 / PSP5 |
| 29 |
RD6 / PSP6 |
| 30 |
RD7 / PSP7 |
| 31 |
VSS – Ground |
| 32 |
VDD – Positive Supply |
| 33 |
RB0 / INT0 |
| 34 |
RB1 / INT1 |
| 35 |
RB2 / INT2 |
| 36 |
RB3 / CCP2 |
| 37 |
RB4 |
| 38 |
RB5 / PGM |
| 39 |
RB6 / PGC |
| 40 |
RB7 / PGD |
Note: Several pins have multiplexed functions. Their operation depends on the microcontroller configuration and enabled peripherals.
Programming and Development
The PIC18LF452-I/P supports firmware development using compatible Microchip development tools.
Recommended Development Tools:
- MPLAB X IDE
- MPLAB XC8 Compiler
- Compatible PICkit Programmer
- ICSP Programming Interface
The microcontroller supports In-Circuit Serial Programming, allowing firmware updates without removing the IC from the circuit.
Applications
- Industrial Automation Systems
- Embedded Control Applications
- Robotics and Motor Control
- PWM-Based Speed Control
- Analog Sensor Monitoring
- Data Acquisition Systems
- Serial Communication Projects
- LCD and Display Interfaces
- Home Automation
- Electronic Measurement Equipment
- Industrial Monitoring Systems
- Educational Microcontroller Projects
- DIY Electronics and Prototyping
Important Notes
-
Programming Required: The microcontroller must be programmed with suitable firmware before use.
-
Voltage and Frequency: The maximum supported clock frequency depends on the operating supply voltage. Consult the Microchip datasheet before designing a 40MHz application.
-
External Oscillator: High-frequency operation requires an appropriate external oscillator or crystal circuit.
-
ADC Inputs: Analog input voltages must remain within the permitted voltage and reference limits.
-
PWM Outputs: PWM signals cannot directly drive high-current motors. Use a suitable motor driver.
-
Serial Communication: The USART operates at microcontroller logic levels. RS232 and RS485 connections require appropriate transceivers.
-
ICSP Programming: Verify programmer compatibility with the PIC18LF452 before use.
-
Pin Multiplexing: GPIO pins may share functions with ADC, communication, timer, and programming peripherals.
-
Not an Arduino Board: This is a standalone PIC microcontroller requiring a compatible PIC development environment.
Package Includes