The 12V DC Plastic Solenoid Water Valve is an electrically controlled valve designed to automatically regulate water flow in electronic and automation projects.
Using an electromagnetic solenoid mechanism, the valve remains closed when no power is applied and opens when the appropriate voltage is supplied, allowing water to flow through the connected piping.
Its plastic construction, compact design, and electrically controlled operation make it suitable for automated water dispensing, irrigation systems, DIY electronics, and microcontroller-based water control applications.
The valve can be controlled using Arduino, ESP32, Raspberry Pi, or other microcontrollers through a suitable relay or MOSFET driver circuit.
Key Features
-
12V DC Operation: Designed for low-voltage DC control systems.
-
Normally Closed Design: Stops water flow when power is disconnected.
-
Electromagnetic Control: Opens automatically when the solenoid is energized.
-
Plastic Valve Body: Lightweight construction suitable for compatible water applications.
-
Automatic Water Control: Ideal for electronic water dispensing and automation.
-
Microcontroller Compatible: Can be controlled through a suitable relay or MOSFET driver.
-
Compact Design: Suitable for integration into small equipment and DIY projects.
-
Threaded Inlet Connection: Designed for connection to compatible water fittings.
Technical Specifications
| Parameter |
Specification |
| Product Type |
Solenoid Water Valve |
| Valve Type |
Normally Closed (NC) |
| Rated Voltage |
12V DC |
| Valve Body Material |
Plastic |
| Inlet Connection |
1/2" BSP Thread |
| Outlet Connection |
12mm |
| Operating Medium |
Water |
| Working Temperature |
1°C to 75°C |
| Flow Rate at 0.02 MPa |
3 L/min |
| Flow Rate at 0.1 MPa |
12 L/min |
| Flow Rate at 0.8 MPa |
35 L/min |
| Operating Principle |
Electromagnetic Solenoid |
| Electrical Connection |
2 Solenoid Terminals |
Flow rates are based on the supplied product specifications and may vary depending on installation conditions and water pressure.
Connection and Operation
Electrical Connection
The solenoid valve operates using a 12V DC power supply.
- Connect the valve to a suitable 12V DC power source through an appropriate switching circuit.
- When 12V DC is applied, the solenoid activates and opens the valve.
- Water flows through the valve while it remains energized.
- When power is disconnected, the valve returns to its normally closed position.
Arduino / ESP32 Connection
The valve can be controlled using a microcontroller and a suitable relay or MOSFET driver.
| Component |
Connection |
| Solenoid Valve |
Driver or Relay Output |
| 12V DC Power Supply |
Valve Power Circuit |
| Arduino / ESP32 GPIO |
Driver Control Input |
| Flyback Diode |
Across Solenoid Coil |
Important: Do not connect the solenoid valve directly to a microcontroller GPIO pin. Use a suitable driver and flyback protection.
Applications
- Automatic Water Dispensing Systems
- Smart Irrigation Projects
- Arduino and ESP32 Water Control
- Automated Plant Watering
- DIY Water Flow Control
- Water Distribution Systems
- Electronic Fluid Control Equipment
- Educational Automation Projects
- Prototype Water Management Systems
Important Notes
-
DC Power Only: Use a regulated 12V DC power supply.
-
Normally Closed: The valve remains closed without electrical power.
-
Pressure Requirement: Solenoid valves of this type may require a minimum water pressure to operate correctly.
-
Water Compatibility: Intended for water applications; compatibility with chemicals, oils, and other liquids is not confirmed.
-
Electrical Protection: Use a flyback diode when switching the coil using a transistor or MOSFET.
-
Power Supply Capacity: Ensure the power supply can provide sufficient current for the solenoid.
-
Flow Direction: Follow any inlet/outlet direction markings on the valve body.
-
Food and Drinking Water: Potable-water certification is not confirmed.
-
Continuous Operation: Maximum continuous energization time is not specified.
Package Includes