Robot Pi Shop

Power-OFF Protection Module

$3.99

Shipping calculated at checkout.

Quantity

DC 12V–48V Automatic Power Switching Module – 10A

The DC 12V–48V Automatic Power Switching Module is a relay-based power management board designed to automatically switch between a primary DC power supply and a backup battery when the main power source is disconnected or fails.

Supporting 12V, 24V, 36V, and 48V DC systems, this module provides a practical solution for maintaining power to compatible electronic equipment during interruptions to the primary power supply.

When the main DC power source is available, the module prioritizes it. If the primary supply is lost, the relay automatically switches the connected load to the backup power source.

Its compact design, screw-terminal connections, and 10A advertised load capacity make it suitable for DIY electronics, emergency backup systems, and low-voltage power management applications.

Key Features

  • Automatic Power Source Switching: Changes from the primary DC supply to a backup source when the main supply fails.
  • Wide DC Voltage Compatibility: Designed for 12V to 48V DC systems.
  • Primary Power Priority: Uses the main DC supply whenever it is available.
  • Battery Backup Support: Allows a compatible backup battery to supply the load during power interruptions.
  • Relay-Based Operation: Uses an electromechanical relay to switch between power sources.
  • 10A Load Rating: Advertised maximum load current of 10A.
  • Compact PCB Design: Suitable for integration into electronic equipment and control enclosures.
  • Screw Terminal Connections: Provides convenient wiring for power inputs and load output.
  • Mounting Holes: Allows secure installation inside compatible enclosures.

Technical Specifications

Parameter Specification
Product Type Automatic DC Power Switching Module
Model YX-X804
Operating Voltage DC 12V–48V
Supported Nominal Voltages 12V / 24V / 36V / 48V DC
Maximum Load Current 10A (advertised)
Switching Technology Electromechanical Relay
Primary Power Source DC Power Supply
Secondary Power Source DC Backup Battery
Switching Function Automatic Primary/Backup Selection
PCB Material Copper-Clad Laminate
PCB Construction Double-Layer, 1.6mm Thick
Dimensions Approx. 50 × 30 × 18mm
Mounting Hole Diameter 3mm
Mounting Hole Spacing Approx. 23mm (as listed)
Connection Type Screw Terminals

Working Principle

1. Normal Operation

When the primary DC power supply is available, the module selects the main power source to supply the connected load.

2. Power Failure Detection

If the primary DC supply is disconnected or loses power, the relay changes state.

3. Automatic Backup Switching

The module switches the load to the connected backup battery or secondary DC power source.

4. Main Power Restoration

When the primary DC supply returns, the module automatically switches the load back to the main power source.

Applications

  • DC Battery Backup Systems
  • Emergency Power Switching
  • DIY UPS Projects
  • Security and Monitoring Equipment
  • Industrial Control Systems
  • Low-Voltage Electronic Equipment
  • Automation Projects
  • DC Power Management Systems
  • Backup Power for Compatible Controllers

Connection Overview

The module provides connections for:

  • Main DC Power Input: Primary power supply.
  • Backup DC Input: Secondary supply or battery.
  • Load Output: Equipment receiving power from the selected source.

Follow the terminal markings printed on the PCB when connecting the module.

Important Notes

  • DC Operation Only: Designed for DC power systems. Do not connect directly to AC mains electricity.
  • Voltage Compatibility: Ensure both power sources and the connected load operate at compatible voltages.
  • Current Limitation: Do not exceed the module's verified relay and PCB current ratings.
  • Switching Interruption: Relay switching is not instantaneous and may cause a brief interruption in power to the load.
  • Not a Battery Charger: The module switches between power sources but does not provide battery charging or battery management functions.
  • Battery Protection: Use appropriate battery protection and charging circuitry where required.
  • Electrical Protection: Use suitable fuses and wiring for the connected load.
  • Installation: Verify terminal polarity and wiring before applying power.

Package Includes

  • 1 × DC 12V–48V Automatic Power Switching Relay Module