Robot Pi Shop

PT2272 Wireless Receiver Module

$3.50

Shipping calculated at checkout.

Quantity

PT2272-M4 433MHz Wireless RF Receiver Module – 4 Channel

The PT2272-M4 433MHz Wireless RF Receiver Module is a compact wireless receiver designed for remote control, automation, and electronic switching applications.

Featuring the PT2272-M4 decoder IC, this module receives and decodes 433MHz RF signals transmitted by compatible PT2262 encoder-based transmitters.

It supports up to 4 independent digital output channels with momentary operation, making it suitable for wireless switching, security systems, garage door controllers, and DIY electronics projects.

Operating at 5V DC, the module provides TTL-level outputs that can interface with compatible microcontrollers or external control circuits.

Key Features

  • 433MHz RF Reception: Receives wireless signals from compatible 433MHz transmitters.
  • PT2272-M4 Decoder IC: Decodes signals generated by compatible PT2262 encoder circuits.
  • 4-Channel Output: Supports up to four independent control channels.
  • Momentary Output Mode: Outputs activate while a valid corresponding command is received.
  • 5V DC Operation: Suitable for regulated 5V electronic systems.
  • TTL-Level Outputs: Allows integration with compatible digital control circuits.
  • High Receiver Sensitivity: Specified sensitivity of -105dBm.
  • Integrated Antenna: Onboard spring antenna for wireless reception.
  • Microcontroller-Free Operation: Can operate directly with a compatible transmitter.
  • Compact PCB Design: Suitable for embedded wireless control applications.

Technical Specifications

Parameter Specification
Product Type Wireless RF Receiver Module
Decoder IC PT2272-M4
Operating Frequency 433MHz
Operating Voltage 5V DC
Operating Current Approximately 3mA
Receiver Sensitivity -105dBm
Number of Channels 4
Output Signal TTL-Level Digital
Output Mode Momentary
Compatible Encoder PT2262
Compatible Transmitter PT2262 433MHz RF Transmitter Module
Antenna Onboard Spring Antenna
Wireless Range 20–200m in Open Space (supplier-stated)

How It Works

The PT2272-M4 receiver module receives encoded 433MHz RF signals from a compatible PT2262 transmitter.

The onboard decoder compares the received address information with its configured address settings.

When a valid matching signal is detected, the corresponding output channel is activated.

Because this module uses the PT2272-M4 momentary decoder, its outputs remain active only while the corresponding valid transmission is being received.

Connection and Operation

  1. Connect a regulated 5V DC power supply to the receiver module.
  2. Connect the module ground to the circuit ground.
  3. Configure the receiver address to match the PT2262 transmitter.
  4. Connect the required output channels to compatible control circuitry.
  5. Activate a transmitter channel to trigger the corresponding receiver output.

Note: Verify the actual pin labels and pinout before wiring.

Arduino and ESP32 Compatibility

The receiver can be integrated into Arduino and ESP32 projects through its digital output channels.

Arduino Uno: The receiver's TTL outputs can be connected to compatible 5V digital input pins.

ESP32: Because the receiver operates at 5V, use appropriate logic-level conversion if the outputs can reach 5V. ESP32 GPIO pins are not 5V tolerant.

A microcontroller is optional for basic wireless switching but can provide additional control logic and automation functions.

Applications

  • Wireless Remote Control Systems
  • Garage Door Controllers
  • Home Automation Projects
  • Wireless Relay Switching
  • Security and Alarm Systems
  • Remote-Controlled Lighting
  • DIY Robotics Projects
  • Arduino and ESP32 Projects
  • Industrial Remote Switching
  • Wireless Electronic Control Systems

Important Notes

  • This product is a receiver module only. A compatible transmitter is required.
  • Designed for use with PT2262-based 433MHz transmitters.
  • Transmitter and receiver address configurations must match.
  • The PT2272-M4 provides momentary outputs, not latching outputs.
  • A relay driver or suitable interface is required when controlling high-current loads.
  • Wireless range depends on antenna placement, obstacles, interference, and operating conditions.
  • The 20–200m range is a supplier-stated estimate, not a guaranteed operating distance.
  • This module does not support Wi-Fi or Bluetooth communication.

Package Includes

  • 1 × PT2272-M4 433MHz Wireless RF Receiver Module