RCWL-1670 Waterproof Ultrasonic Distance Sensor Module – 400cm
The RCWL-1670 Waterproof Ultrasonic Distance Sensor is a compact, low-power module designed for non-contact distance measurement in robotics, automation, and electronic projects.
Operating at 3V to 5V, the sensor measures distances from approximately 2cm to 400cm using ultrasonic technology. Its water- and dust-resistant transducer design makes it suitable for applications where conventional ultrasonic sensors may be exposed to moisture or dust.
The RCWL-1670 uses an HC-SR04-style trigger and echo interface, making it convenient to integrate with Arduino, ESP32, Raspberry Pi, and other microcontrollers.
Key Features
-
Distance Measurement: Measures objects from 2cm to 400cm.
-
Water-Resistant Transducers: Designed for improved resistance to moisture and dust.
-
Low Power Consumption: Approximately 6mA operating current.
-
Wide Operating Voltage: Supports 3V to 5V DC.
-
HC-SR04-Style Interface: Uses familiar trigger and echo signaling.
-
Fast Measurement: Approximately 50ms measurement cycle.
-
Compact Design: Suitable for robotics and embedded systems.
-
Non-Contact Detection: Measures distance without physical contact.
-
Microcontroller Compatible: Suitable for Arduino, ESP32, and Raspberry Pi projects with appropriate interfacing.
Technical Specifications
| Parameter |
Specification |
| Model |
RCWL-1670 |
| Sensor Type |
Ultrasonic Distance Sensor |
| Measurement Range |
2–400cm |
| Maximum Detection Distance |
4m |
| Operating Voltage |
3–5V DC |
| Operating Current |
Approximately 6mA |
| Standby Current at 5V |
Approximately 3.5µA |
| Standby Current at 3.3V |
Approximately 1.5µA |
| Blind Zone |
Approximately 2cm |
| Measurement Cycle |
Approximately 50ms |
| Operating Temperature |
-25°C to +85°C |
| Operating Humidity |
5–95% RH |
| Board Dimensions |
57 × 23 × 11mm |
| Interface |
Trigger / Echo |
| Transducer Design |
Water- and Dust-Resistant |
Pin Configuration
| Pin |
Function |
| VCC |
3–5V DC Power Supply |
| TRIG |
Ultrasonic Measurement Trigger |
| ECHO |
Echo Pulse Output |
| GND |
Ground |
Confirm the actual pin order from the PCB markings before wiring.
Connection Examples
Arduino UNO
| RCWL-1670 |
Arduino UNO |
| VCC |
5V |
| GND |
GND |
| TRIG |
D9 |
| ECHO |
D10 |
ESP32
| RCWL-1670 |
ESP32 |
| VCC |
3.3V |
| GND |
GND |
| TRIG |
GPIO5 |
| ECHO |
GPIO18 |
Important: When using ESP32, operate the sensor at 3.3V where supported and confirm that the ECHO signal does not exceed the ESP32 GPIO voltage rating.
Applications
- Robot Obstacle Detection
- Distance Measurement Projects
- Smart Parking Systems
- Object Detection
- Industrial Automation Prototypes
- Smart Home Applications
- Robotics and Educational Projects
- Contactless Proximity Detection
- Outdoor Monitoring Projects with Suitable Enclosures
Important Notes
- The sensor has water- and dust-resistant transducers, but the exposed PCB is not fully waterproof.
- Protect the circuit board from direct water exposure, condensation, and corrosion.
- The module is not intended for underwater operation.
- Distance accuracy may vary depending on object shape, surface material, angle, temperature, and environmental conditions.
- The minimum measurable distance is approximately 2cm.
- The HC-SR04-style interface does not guarantee identical electrical behavior across every board revision.
- Ensure correct wiring and supply voltage before powering the sensor.
Package Includes