Robot Pi Shop

KY-016 RGB Full Color LED Module

$1.25

Shipping calculated at checkout.

Quantity

KY-016 RGB Full Color LED Module – 5mm RGB LED for Arduino & ESP32

The KY-016 RGB Full Color LED Module is a compact LED module designed to produce a wide range of colors for electronic projects, visual indicators, and decorative lighting applications.

Featuring a 5mm RGB LED, the module combines red, green, and blue light elements in a single LED package. By independently controlling each color channel using PWM (Pulse Width Modulation), users can create different colors, brightness levels, and dynamic lighting effects.

The KY-016 is ideal for Arduino, ESP32, Raspberry Pi, robotics, automation, and DIY electronics projects.

Key Features

  • Model: KY-016
  • LED Type: 5mm RGB LED
  • LED Colors: Red, Green, Blue
  • Color Mixing: Multiple Colors Using PWM Control
  • LED Configuration: Common Cathode (Typical)
  • Control Method: Digital Output / PWM
  • Interface: 4 Pins (R, G, B, -)
  • Independent Brightness Control for Each Color
  • Compact PCB Design
  • Suitable for Arduino, ESP32, and Raspberry Pi Projects

Technical Specifications

Parameter Specification
Model KY-016
Product Type RGB Full Color LED Module
LED Type 5mm Through-Hole RGB LED
Number of LEDs 1 RGB LED
LED Colors Red, Green, Blue
LED Configuration Common Cathode (Typical)
Red Forward Voltage Approximately 1.8–2.2V
Green Forward Voltage Approximately 3.0–3.3V
Blue Forward Voltage Approximately 3.0–3.3V
Control Voltage 3.3V / 5V Logic with Suitable Current Limiting
Control Method PWM / Digital Output
Number of Pins 4
Typical Pin Configuration R / G / B / -
Board Dimensions Approximately 18.5 × 15mm
Current Limiting Required for Each LED Channel

Pin Configuration

Pin Function
R Red LED Control
G Green LED Control
B Blue LED Control
- Common Ground (Cathode)

Arduino Connection Example

KY-016 Arduino Uno
R D9 through a suitable resistor
G D10 through a suitable resistor
B D11 through a suitable resistor
- GND

Use suitable current-limiting resistors for each color channel unless the supplied module already includes them.

Arduino Example Code

const int redPin = 9;
const int greenPin = 10;
const int bluePin = 11;

void setColor(int red, int green, int blue) {
  analogWrite(redPin, red);
  analogWrite(greenPin, green);
  analogWrite(bluePin, blue);
}

void setup() {
  pinMode(redPin, OUTPUT);
  pinMode(greenPin, OUTPUT);
  pinMode(bluePin, OUTPUT);
}

void loop() {
  setColor(255, 0, 0);     // Red
  delay(1000);

  setColor(0, 255, 0);     // Green
  delay(1000);

  setColor(0, 0, 255);     // Blue
  delay(1000);

  setColor(255, 255, 0);   // Yellow
  delay(1000);

  setColor(255, 0, 255);   // Purple
  delay(1000);

  setColor(0, 255, 255);   // Cyan
  delay(1000);

  setColor(255, 255, 255); // White
  delay(1000);

  setColor(0, 0, 0);       // OFF
  delay(1000);
}

This example cycles through several RGB color combinations using Arduino PWM outputs.

Applications

  • Arduino and ESP32 Projects
  • Raspberry Pi GPIO Indicators
  • RGB Color Mixing Experiments
  • Robotics Status Indicators
  • Decorative LED Lighting
  • Electronic Control Panels
  • Interactive Displays
  • Educational STEM Projects
  • DIY Electronics
  • Visual Alarm and Notification Systems

Important Notes

  • The KY-016 is a non-addressable RGB LED module. Each color channel must be controlled individually.
  • Unlike WS2812B or NeoPixel LEDs, it does not use a serial digital communication protocol.
  • The KY-016 typically uses a common-cathode RGB LED. Verify the configuration of the supplied version before wiring.
  • Some versions include onboard current-limiting resistors; others may require external resistors.
  • Use PWM-capable outputs for smooth brightness adjustment and color mixing.
  • For ESP32 and Raspberry Pi, respect the 3.3V GPIO voltage and current limits.
  • The module is designed for indicator lighting and educational projects, not high-power illumination.

Package Includes

1 × KY-016 RGB Full Color LED Module