SHT20 Waterproof Temperature and Humidity Sensor Probe
The SHT20 Waterproof Temperature and Humidity Sensor Probe is a compact digital sensor designed for monitoring environmental temperature and relative humidity in industrial, agricultural, and DIY electronics applications.
Based on the SHT20 sensor, this probe provides digital measurements with up to 14-bit resolution. Its protective probe housing and cable design make it suitable for installations where the sensing element requires protection from dust, splashes, and environmental exposure.
Operating at 3.3V–5V DC, the sensor is suitable for integration with compatible microcontrollers and monitoring systems.
Key Features
-
Dual Measurement: Measures temperature and relative humidity.
-
Digital Sensor: Based on the SHT20 temperature and humidity sensing element.
-
High Resolution: Up to 14-bit digital measurement resolution.
-
Water-Resistant Probe Design: Protective housing suitable for demanding environments.
-
Low Power Consumption: Approximately 15mA operating current, according to the supplied specifications.
-
Wide Temperature Range: Measures temperatures from -20°C to +100°C.
-
Humidity Measurement: Supports relative humidity monitoring.
-
Compact Probe: Suitable for remote sensing installations.
-
Microcontroller Integration: Suitable for compatible digital sensor interfaces.
Technical Specifications
| Parameter |
Specification |
| Model |
FS200-SHT20 |
| Sensor Type |
Digital Temperature and Humidity Sensor |
| Sensor Element |
SHT20 |
| Operating Voltage |
DC 3.3V–5V |
| Operating Current |
15mA (Supplier-Stated) |
| Temperature Measurement Range |
-20°C to +100°C |
| Humidity Measurement Range |
0–100% RH (Supplier-Stated) |
| Temperature Accuracy |
±0.5°C (Supplier-Stated) |
| Humidity Accuracy |
±3% RH (Supplier-Stated) |
| Measurement Resolution |
Up to 14-bit |
| Operating Temperature |
-20°C to +90°C |
| Operating Humidity |
0–99% RH |
| Storage Temperature |
-20°C to +80°C |
| Storage Humidity |
0–95% RH |
| Communication Interface |
Digital; exact probe interface to be confirmed |
| Probe Construction |
Protective sensor housing with cable |
| Waterproof Rating |
Not Specified |
Connection and Compatibility
The SHT20 sensing element normally uses an I2C digital communication interface.
Typical SHT20 connections include:
| Signal |
Function |
| VCC |
Power Supply |
| GND |
Ground |
| SDA |
I2C Data |
| SCL |
I2C Clock |
Important: The FS200-SHT20 probe may include interface circuitry or a different cable configuration. Confirm its actual pinout and communication protocol before connecting it to a microcontroller.
The sensor can be integrated with Arduino, ESP32, Raspberry Pi, or other controllers when the probe's electrical interface is compatible.
Applications
- Greenhouse Temperature and Humidity Monitoring
- Agricultural Environmental Monitoring
- HVAC Monitoring Systems
- Warehouse and Storage Monitoring
- Weather Monitoring Stations
- Indoor Environmental Monitoring
- Smart Home Automation
- Industrial Environmental Monitoring
- IoT Sensor Projects
- Educational Electronics Projects
Important Notes
- Although marketed as waterproof, the exact IP protection rating has not been confirmed.
- Do not assume the probe is suitable for continuous underwater operation.
- The sensing element requires exposure to ambient air to measure relative humidity accurately.
- Avoid prolonged condensation and direct water exposure to the sensing element.
- Confirm the probe's communication interface and wire configuration before installation.
- Temperature and humidity accuracy may vary with operating conditions.
- The maximum measurement range does not necessarily represent the range over which the stated accuracy is guaranteed.
- Use a stable power supply within the specified operating range.
Package Includes